進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
SparkFun Roshamglo徽章套裝
原名
SparkFun Roshamglo Badge Kit
貨號
KIT-14130
特價
429
資料來源：https://www.sparkfun.com/products/14130
The SparkFun Roshamglo is the new and fun way to play Rock-Paper-Scissors with your friends! The board uses the ATtiny84, and has an IR LED and receiver to communicate between badges. To play, simply point the USB connector at your opponents Roshamglo up to 5 feet away and press the 5-way switch to the left for rock, up for paper, and right for scissors. The red/green LED will display a solid red for lose, green for win, or alternate red and green for a tie. Your Roshamglo can also be worn with a lanyard clip to provide you easier access when a battle is about to ensue!
The Roshamglo Badge comes as an easy to assemble kit that only requires you to solder on six battery clips to the underside of the board and insert three AAA sized alkaline batteries. No other soldering or programming is required! Once you install the clips and batteries you can start playing Rock Paper Scissors with a friend or start hacking your Roshamglo.
The Roshamglo uses the Micronucleaus bootloader, which allows for programming from the Arduino IDE via the USB connector at the front of the board. We have included two tutorials below to help teach you how to hack your new Roshamglo as well as turn it into a remote to control to turn on and off most styles of televisions!
Note: If you don’t have a scoreboard available to reset the play counter, you can download the firmware here. Commenting out gameResult = 3; on line 279 will remove the play count limitation written in the stock code.
Get Started with the SparkFun Roshamglo Guide
Includes:
- 1x Roshamglo Board
- 3x AAA Alkaline Battery
- 6x AAA Battery Holder
Features:
- 8kB of flash memory for our program (~6kB after the bootloader is installed)
- 512B of SRAM, which stores our variables used in our program
- 512B of EEPROM
- 12 IO pins MAX (the Roshamglo breaks out 9 of these pins)
- 10-bit analog to digital converter which can be used on 8 pins
- IR LED
- IR receiver with built in 38kHz demodulator
- USB programming
- Programmable red and green LED
- Power switch
- 5-way switch for input
- Reset switch
Documents:
該SparkFun Roshamglo是玩剪刀，石頭，布與您的朋友在新的和有趣的方式！所述板使用ATtiny84則，並且具有IR LED和接收機徽章之間進行通信。要播放時，只需將USB連接器在你的對手Roshamglo長達5英尺遠，5路開關按到左側岩石，人們對於紙張和右剪刀。紅/綠LED顯示為失去一個穩定的紅色，綠色為勝，或替代紅色和綠色領帶。您Roshamglo也可以用掛繩佩戴夾，為您提供更方便的訪問時，戰鬥即將接踵而至！
該Roshamglo徽章之際，一個簡單的組裝套件，只需要你對6個電池夾焊接到電路板的下面，並插入三節AAA尺寸的鹼性電池。沒有其他焊接或編程要求！一旦你安裝了剪輯和電池，你可以開始玩剪刀石頭布與朋友或啟動黑客攻擊你的Roshamglo。
所述Roshamglo使用Micronucleaus引導程序，其允許通過在板的前部的USB連接器從所述的Arduino IDE編程。這裡已包括以下兩個教程，以幫助教你如何破解新Roshamglo以及把它變成一個遙控器來控制開啟和關閉電視機的款式最多！
特徵：
- 閃存對我們的節目的8kB的（〜安裝引導程序後6KB）
- SRAM的512B，其中存儲了變量在我們的程序中使用
- EEPROM的512B
- 12 IO管腳MAX（在Roshamglo打破這些引腳的出9）
- 10位模擬數字轉換器，可以在8個管腳被使用
- IR LED
- IR接收器內置在38kHz的解調器
- USB編程
- 可編程的紅色和綠色LED
- 開關;電源開關
- 5路開關輸入
- 重置開關
套件包括：
- 1X Roshamglo局
- 3X AAA鹼性電池
- 6倍AAA電池盒
文件：
