進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
FLIR開發套件
原名
FLiR Dev Kit
貨號
KIT-13233
特價
9,438
資料來源：https://www.sparkfun.com/products/13233
The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager. With this kit you will be able to bring FLiR’s thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. All you need to do to get this kit set up, simply attach the Lepton® imager module into the provided breakout, connect the headers, and you will be seeing in full darkness in no time!
The Lepton® LWIR module included in each FLiR Dev Kit acts as a sort of camera and packs a resolution of 80 × 60 pixels into a camera body that is smaller than a dime and captures infrared radiation input in its nominal response wavelength band (from 8 to 14 microns) and outputs a uniform thermal image. Meanwhile, each breakout board in these kits provides the socket for the Lepton®, power supply’s, 25Mhz Crystal Oscillator, 100 mil header for use in a breadboard or wiring to any host system. A few things to consider about this kit: the breakout board will accept a 3-5V input and regulate it to what the Lepton® wants, to read an image from the lepton module all you need is an SPI port, and to configure the camera settings you also need an I2C port, although this is not required.
Note: This kit comes in two separate parts and will need to be assembled once received. The Lepton® module is extremely sensitive to electrostatic discharge (ESD). When inserting it into the breakout board be sure to use proper personal grounding, such as a grounding wrist strap, to prevent damage the module.
Includes:
- 1x FLiR Lepton® - Thermal Imaging Module
- 1x FLiR Lepton® - Breakout Board
Features:
- LWIR sensor, wavelength 8 to 14 μm
- 51-deg HFOV, 63.5-deg diagonal
- 80 (h) × 60 (v) active pixels
- Thermal sensitivity <50 mK
- MIPI and SPI video interfaces
- Two-wire I2C-like serial-control interface
- Fast time to image (< 0.5 sec)
- Low operating power, nominally 150 mW (< 160 mW over full temperature range)
Documents:
- Schematic
- Datasheet (Lepton®)
- Hookup Guide
- SDK
- Reverse-Engineering the Lepton®
- Product Page
- GitHub (Library, Example Code, & Design Files)
Videos
該FLIR開發套件包括一個突破和一個Lepton®長波紅外（長波）的成像。有了這個工具包，你將能夠把FLIR的熱成像可靠性和電能到你的Arduino，樹莓派，或任何基於ARM開發工具都在一個易於訪問線路板友好的軟件包。所有你需要做的就是這個包設置，只需將Lepton®成像器模塊連接到提供的分場，連接頭，你會充滿了黑暗在任何時間看到的！
包括在每個FLIR開發套件Lepton®長波紅外模塊作為一種照相機和包的80×60像素的分辨率到相機機身比一毛錢小，其標稱響應的波段捕捉紅外輻射輸入（從8到14微米），並輸出一個均勻的熱圖像。同時，這些工具包的每個接口板提供了Lepton®插座，電源的，25MHz晶體振盪器，100萬頭用於麵包板或電線任何主機系統使用。有幾件事情要考慮這個套件：突圍板將接受3-5V輸入，並將其調整到Lepton®想要什麼，讀取輕子模塊的所有你需要的是SPI端口的圖像，並配置攝像頭設置你還需要一個I 2 C接口，雖然這不是必需的。
注意：此試劑盒有兩個單獨的部分，並將需要被組裝一次接收。該Lepton®模塊是靜電放電（ESD）非常敏感。當將其插入接口板一定要使用正確的個人接地，如接地腕帶，以防止損壞模塊。
包括：
- 1X FLIRLepton® - 熱成像模塊
- 1X FLIRLepton® - 分線板
特徵：
- LWIR傳感器，波長8〜14微米的
- 51度HFOV，63.5度角
- 80（H）×60（V）有效像素
- 熱靈敏度<50 mK的
- MIPI和SPI視頻接口
- 兩線I2C串行一樣控制接口
- 快速實現圖像（<0.5秒）
- 較低的工作功耗，標稱150毫瓦（<160毫瓦在整個溫度範圍內）
文件：
