DEV-14317 JustBoom Digi HAT推薦購買價格代理經銷

原名

貨號

DEV-14317

特價

資料來源：https://www.sparkfun.com/products/14317

The JustBoom Digi HAT is a high-resolution digital audio output add-on board for the Raspberry Pi. Simply stack the plug-and-play add-on board (HAT) onto your Raspberry Pi A+, B+, 2B or the new 3B, and it will be ready to use immediately. The JustBoom Digi HAT produces an unmodified, high-quality digital audio data stream for bit-perfect transmission to your hi-fi system.

JustBoom designed the Digi HAT to be simple to install and use. With no soldering required and all the mounting hardware already provided, this product is suitable for beginners and seasoned professionals alike. Just connect your Digi HAT to external DAC or amplifier/amplified speakers and you can be up and running quickly, enjoying flawless high-quality audio playback within minutes.

The Raspberry Pi Digi HAT uses the I²S interface for its audio input, which reduces CPU load on the Raspberry Pi compared with USB solutions. It is also powered directly from the GPIO header, so no extra cables or power supplies are required to connect to the Raspberry Pi. All of the Raspberry Pi GPIO pins are still accessible on the Digi HAT for easy customization of your project. Add additional sensors, buttons, LEDs, rotary encoders or anything your heart desires.

Features:

Dedicated S/PDIF output interface chip supports up to 192kHz / 24-bit resolution
Digital audio output over either optical (TOSLINK) or coaxial (RCA electrical) connectors
Low-jitter, bit-perfect digital output
Output transformer for galvanic isolation
Plug-and-play compatibility for ease of use
Software volume control from your Raspberry Pi
No soldering required
Powered by the Raspberry Pi GPIO header
Compatible with Raspberry Pi A+, B+, 2B and the new 3B
Mounting hardware included
Optional IR receiver included in package
All Raspberry Pi GPIO pins still accessible via 40-pin unpopulated extension header
Full driver support in Raspbian / NOOBS
Compatible with OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others

Documents:

Videos

JustBoom Digi HAT是Raspberry Pi的高分辨率數字音頻輸出附加板。只需將即插即用附加板（HAT）堆疊到您的Raspberry Pi A +，B +，2B或新3B上即可立即使用。 JustBoom Digi HAT產生一個未經修改的高品質數字音頻數據流，可將您完美的傳輸到您的高保真音響系統。

JustBoom設計的Digi HAT易於安裝和使用。無需焊接，所有的安裝硬件都已經提供，本產品適合初學者和經驗豐富的專業人士。只需將Digi HAT連接到外部DAC或放大器/放大揚聲器，即可快速啟動並運行，在數分鐘內即可享受完美無瑕的高質量音頻播放。

Raspberry Pi Digi HAT使用I ² S接口進行音頻輸入，與USB解決方案相比，可以降低Raspberry Pi的CPU負載。它也直接從GPIO頭供電，因此無需額外的電纜或電源連接到Raspberry Pi。所有的Raspberry Pi GPIO引腳仍然可以在Digi HAT上訪問，便於您自定義項目。添加其他傳感器，按鈕，LED，旋轉編碼器或任何您所需要的東西。

特徵：

專用S / PDIF輸出接口芯片支持高達192kHz / 24位分辨率
數字音頻輸出通過光（TOSLINK）或同軸（RCA電）連接器
低抖動，位完美的數字輸出
輸出變壓器用於電隔離
即插即用兼容性，易於使用
您的Raspberry Pi的軟件音量控制
無需焊接
由Raspberry Pi GPIO頭
與Raspberry Pi A +，B +，2B和新3B兼容
包括安裝硬件
可選的紅外接收器包含在包裝中
所有Raspberry Pi GPIO引腳仍然可以通過40引腳未擴展的擴展接頭連接
在Raspbian / NOOBS中完全支持駕駛員
兼容OSMC / Max2Play / RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC等

文件：