進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
tinyTILE - 英特爾®居里開發板
原名
tinyTILE - Intel® Curie Dev Board
貨號
DEV-14281
特價
1,673
資料來源：https://www.sparkfun.com/products/14281
The tinyTILE, an Intel® Curie-based board, is a miniaturized adaptation Arduino/Genuino 101® board perfect for wearable and IoT applications. The tinyTILE has been equipped with many of the same features as the 101 line with Bluetooth Low Energy (BLE) capabilities and an onboard 6-axis accelerometer/gyroscope, allowing you to be able to create plenty of imaginative projects. The tinyTILE board can be programmed using either the Arduino IDE or Intel’s own software, the Intel® Curie™ Open Developer Kit (CODK).
Like its Arduino form-factor cousins, the tinyTILE’s core is comprised around the Intel Curie module, a low-power computer module that comes with pattern-matching capabilities for optimized analysis of sensor data. This enables quick and easy identification of actions and motions. The tinyTILE is a complete low-power solution designed for multipurpose use and rapid prototyping.
The onboard Intel Curie module offers features that are ideal for “always-on” applications requiring motion monitoring, wireless capabilities and low power use — all in a small size. Inside the Curie are two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks. The tinyTILE comes with 14 digital input/output pins (same as the Arduino/Genuino 101s), six analog inputs, 384kB of flash memory, 80kB of SRAM, and a microUSB connector for serial communication and sketch upload. The board operating voltage and I/O is 3.3V, but all pins are protected against 3.3V overvoltage.
Features:
- Microcontroller: Intel Curie
- 384kB flash memory
- 80kB SRAM
- Low-power integrated DSP sensor hub and pattern-matching technology
- Bluetooth Low Energy
- 6-axis combo sensor with accelerometer and gyroscope
- Battery-charging circuitry (PMIC)
- Regulated 3.3 volt power output
Documents:
Videos
tinyTILE是一種基於英特爾®居里設備的電路板，適用於可穿戴和IoT應用的小型化適配Arduino / Genuino 101®板。 tinyTILE已經配備了許多相同的功能，如101線與藍牙低功耗（BLE）功能和板載6軸加速度計/陀螺儀，使您能夠創造大量富有想像力的項目。可以使用Arduino IDE或英特爾自己的軟件 - 英特爾®庫裡™開放式開發工具包（CODK）編程tinyTILE板。
像其Arduino形狀表兄弟一樣，tinyTILE的核心圍繞著英特爾居里模塊，這是一個低功耗計算機模塊，具有模式匹配功能，可優化傳感器數據分析。這樣可以快速方便地識別動作和動作。 tinyTILE是為多用途和快速原型設計的完整的低功耗解決方案。
車載Intel Curie模塊提供了非常適合需要運動監控，無線功能和低功耗使用的“永遠在線”應用的功能 - 所有這些都是小尺寸的。居里內部是兩顆微小的內核，一個x86（夸克）和一個32位的ARC架構內核，時鐘頻率為32MHz。英特爾工具鏈在兩個內核上最佳地編譯了Arduino草圖，以完成最苛刻的任務。 tinyTILE配有14個數字輸入/輸出引腳（與Arduino / Genuino 101相同），6個模擬輸入，384kB閃存，80kB SRAM，以及用於串行通信和草圖上傳的microUSB連接器。電路板工作電壓和I / O為3.3V，但所有引腳均受到3.3V過壓保護。
特徵：
- 微控制器：英特爾居里
- 384kB閃存
- 80kB SRAM
- 低功耗集成DSP傳感器集線器和模式匹配技術
- 藍牙低功耗
- 帶加速度計和陀螺儀的6軸組合傳感器
- 充電電路（PMIC）
- 調節3.3伏電源輸出
文件：
