進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
Teensy道具盾牌
原名
Teensy Prop Shield
貨號
DEV-13995
特價
815
資料來源：https://www.sparkfun.com/products/13995
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. This shield features 10DoF (Degrees of Freedom) motion sensors, a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. This little board is about the size of the Teensy 3.2, just slightly longer to allow space for mounting holes and connections for power, speaker and LEDs.
The Teensy Prop Shield’s crowning glory is, of course, its Freescale 10DoF sensors. The board’s sensor suite comprises an FXOS8700CQ 6-axis linear accelerometer and magnetometer, an FXAS21002C 3-axis digital angular rate gyroscope and an MPL3115A2 precision pressure/altitude and temperature gauge.
That’s not all! The Teensy Prop Shield has been equipped with a slew of other features. Need an amplifier? The Teensy Prop Shield has one rated at 2W and is capable of driving 4 or 8 Ohm speakers. Additionally, the Prop Shield has 5V buffers meant to send data to Dotstar or APA102 type addressable LEDs. It also has an onboard 8MB flash memory, meant for storing sound clips and images, logging data and many other uses.
Note: If you are looking for a more economical board than this version of the Prop Shield, be sure to check out the low-cost (LC) version instead!
Features:
- Motion Sensors – Allow motion interactive light and sound
- Audio Amplifier – Clear quality audio output to a small speaker
- Fast LED Driver – Drive APA102 / Dotstar LEDs for colorful lighting with rapid response
- Flash Memory – 8MB storage for images, sound clips and data logging
Documents:
- Datasheets
- Product Page
Videos
該Teensy道具盾牌是為使互動式燈光和小型手持道具和戲服穿戴聲音效果。這種屏蔽功能10DoF（自由度）運動傳感器，一個2W音頻放大器，用於驅動LED的APA102高速緩存5V，和8MB閃存。這個小板子是關於Teensy 3.2的大小，只是稍長，讓空間用於安裝功率，揚聲器和LED孔和連接。
該Teensy道具盾牌的至高無上的榮耀，當然，它的飛思卡爾10DoF傳感器。董事會的傳感器套件包括FXOS8700CQ 6軸的線性加速度計和磁力計，一個FXAS21002C 3軸數字角速率陀螺儀和MPL3115A2精密壓力/海拔和溫度測量儀。
這還不是全部！該Teensy道具盾已經配備了其他許多功能。需要放大器？該Teensy道具盾有一個額定功率為2W，可驅動4個或8歐姆揚聲器。另外，該螺旋槳盾有為了發送數據到Dotstar或APA102類型尋址的LED 5V緩衝器。它也有一個板載8MB閃速存儲器，這意味著，用於存儲聲音片段和圖像，記錄數據等多種用途。
注意：如果你正在尋找比這個版本的道具盾更經濟的電路板時，一定要檢查出低成本（LC）版本 ，而不是！
特徵：
- 運動傳感器 - 讓運動的互動燈光和音響
- 音頻放大器 - 明確的質量的音頻輸出，以小喇叭
- 快速的LED驅動器 - 驅動APA102 / Dotstar LED用於五顏六色的燈光與快速反應
- 閃存 - 8MB存儲圖像，聲音片段和數據記錄
文件：
