進口程序準備中,近期開放購買。

注意:目前價格僅供參考。

SparkFun RedBoard - 編程的Arduino

原名
SparkFun RedBoard - Programmed with Arduino

貨號
DEV-13975

特價
658

資料來源:https://www.sparkfun.com/products/13975

At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines all our favorite features. The SparkFun RedBoard combines the simplicity of the UNO’s Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3.

The RedBoard can be programmed over a USB Mini-B cable using the Arduino IDE: Just plug in the board, select “Arduino UNO” from the board menu and you’re ready to upload code. RedBoard has all of the hardware peripherals you know and love: 14 Digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts. We’ve also broken out the SDA, SCL and IOREF pins that showed up on the UNO R3, so the RedBoard will be compatible with future shields. This version adds an SMD ISP header for use with shields.

You can power the RedBoard over USB or through the barrel jack. The on-board power regulator can handle anything from 7 to 15VDC. Check out the related items below for a compatible wall-wart power supply.

Not sure which Arduino or Arduino-compatible board is right for you? Check out our Arduino Buying Guide!

Features:

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader
  • USB Programming Facilitated by the Ubiquitous FTDI FT231X
  • Input voltage - 7-15V
  • 0-5V outputs with 3.3V compatible inputs
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • ISP Header
  • 32k Flash Memory
  • 16MHz Clock Speed
  • All SMD Construction
  • R3 Shield Compatible
  • Red PCB!

Documents:

Videos

在SparkFun我們使用許多Arduinos,我們一直在尋找最簡單,最穩定的一個。每塊板是一個有點不同,沒有一個板上有我們想要的一切,所以我們決定把我們自己的版本,結合我們所有喜愛的功能。該SparkFun RedBoard結合UNO的Optiboot引導程序的簡單(這是在Pro系列中使用),該FTDI(該Duemilanove被中斷後,我們都錯過)和最新的Arduino UNO R3的R3盾兼容的穩定性。

該RedBoard可以被編程過度使用Arduino的IDE一個USB mini-B電纜:只需插入板,起板菜單中選擇“的Arduino UNO”,你準備好要上傳的代碼。 RedBoard擁有所有你知道的硬件外設和愛情:14路數字I / O引腳6 PWM引腳,6個模擬輸入,UART,SPI和外部中斷。我們還打破了SDA,SCL和IOREF引腳,即顯示在UNO R3,所以RedBoard將是未來罩。該版本增加了對盾牌使用SMD ISP頭。

您可以通過USB或通過桶傑克·鮑爾的RedBoard。板載電源調節器可處理7〜15VDC什麼。看看下面的相關項目的標準的壁掛疣電源。

不知道它的Arduino或Arduino的兼容主板更適合你?看看我們的Arduino購買指南

特徵:

  • ATmega328微控制器與Optiboot(UNO)的Bootloader
  • USB編程被無處不在的FTDI FT231X推動下
  • 輸入電壓 - 7-15V
  • 0-5V輸出與3.3V兼容輸入
  • 14數字I / O引腳(6 PWM輸出)
  • 6模擬輸入
  • ISP頭
  • 32K閃存
  • 16MHz的時鐘速度
  • 所有SMD建設
  • R3盾兼容
  • 紅色PCB!

文件:

前往
現貨型錄

Line share