進口程序準備中，近期開放購買。
注意：目前價格僅供參考。
Arduino的烏諾 - R3 SMD
原名
Arduino Uno - R3 SMD
貨號
DEV-11224
特價
1,030
資料來源：https://www.sparkfun.com/products/11224
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc. Never fear for accidental electrical discharge, either since since the Uno R3 SMD also includes a plastic base plate to protect it!
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
Special SMD Version: Because Atmel is moving more and more of their production capacity to surface mount ICs, the DIP packaged ATmega is becoming more and more difficult to get. To keep up with demand, we now offer the Arduino Uno R3 with an SMD ATmega. The board is identical to the PTH version of the Uno, but you won’t be able to remove the ATmega without some hot-air. This change shouldn’t affect most users. Besides - when was the last time you managed to destroy an ATmega and needed to repair an Arduino board? Those things are nearly indestructible.
Includes:
- 1x Arduino Uno - R3 SMD
- 1x Plastic Base Plate
Features:
- ATmega328 microcontroller
- Input voltage - 7-12V
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- 32k Flash Memory
- 16Mhz Clock Speed
Documents:
這是新的Arduino的烏諾R3。除了前面板上的所有功能，歐諾現在使用的歐諾發現了一個ATmega16U2代替8U2（或FTDI上上代找到）。這允許更快的傳輸速率和更大的內存。無需驅動程序需要Linux或Mac（需要為Windows INF文件，並列入Arduino的IDE），並有歐諾顯示為鍵盤，鼠標，操縱桿等的能力
歐諾R3還增加了旁邊AREF SDA和SCL引腳。此外，也有放置RESET管腳附近的兩個新的引腳。其中之一是，允許屏蔽，以適應從板提供的電壓IOREF。另一種是未連接，並且被保留用於未來的用途。歐諾R3適用於所有現有的盾牌，但能適應其使用這些額外的引腳新的盾牌。
Arduino是基於一個簡單的I / O板，並實現了一個開發環境，一個開源的物理計算平台處理 / 接線語言。 Arduino的可用於開發獨立的交互式對象或可連接到軟件的計算機（例如閃光，處理中，MaxMSP）上。開源IDE可免費下載（目前用於Mac OS X，Windows和Linux）。
特別SMD版本：因為愛特梅爾正在他們的產能越來越向表面貼裝芯片，封裝的ATmega的DIP正變得越來越難獲得。為了跟上需求，我們現在提供的Arduino的烏諾R3與SMD的ATmega。董事會是相同的烏諾的PTH版本，但你將無法去除的ATmega沒有一些熱空氣。這一變化不會影響大多數用戶。除了 - 當是你成功地摧毀的ATmega並修復一個Arduino電路板所需的最後一次？那些東西都是幾乎堅不可摧。
注：Arduino的烏諾R3要求的Arduino 1.0 drivers文件夾，以便在某些計算機正確安裝。我們已經測試和證實，R 3可以在舊版本的IDE進行編程。但是，使用R3的新計算機上的第一次，你將需要有Arduino的1.0的機器上安裝。如果您有興趣閱讀更多有關更改IDE，請查看官方Arduino的1.0版本註釋 ！
特徵：
- ATmega328微控制器
- 輸入電壓 - 7-12V
- 14數字I / O引腳（6路PWM輸出）
- 6個模擬輸入
- 32K閃存
- 16MHz的時鐘速度
文件：
