進口程序準備中,近期開放購買。

注意:目前價格僅供參考。

Arduino的臨迷你328 - 5V / 16MHz的

原名
Arduino Pro Mini 328 - 5V/16MHz

貨號
DEV-11113

特價
328

資料來源:https://www.sparkfun.com/products/11113

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin and not VCC.

The latest and greatest version of this board breaks out the ADC6 and ADC7 pins as well as adds footprints for optional I2C pull-up resistors! We also took the opportunity to slap it with the OSHW logo.

Note: A portion of this sale is given back to Arduino LLC to help fund continued development of new tools and new IDE features.

Features:

  • ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • 0.8mm Thin PCB
  • USB connection off board
  • Supports auto-reset
  • 5V regulator
  • Max 150mA output
  • Over current protected
  • Weighs less than 2 grams!
  • DC input 5V up to 12V
  • On board Power and Status LEDs
  • Analog Pins: 8
  • Digital I/Os: 14
  • 0.7x1.3" (18x33mm)

Documents:

這是藍色的!它的薄!這是Arduino的臨迷你! SparkFun的簡約的設計方法的Arduino。這是一個5V的Arduino運行16MHz的引導程序。 Arduino的臨迷你不來填充,這樣你可以在任何連接線或與你需要的任何方向焊接接頭。我們建議第一次Arduino的用戶開始與宇野R3。這是一個偉大的董事會,將讓你快速啟動和運行。 Arduino的Pro系列是用於那些了解系統電壓(5V)的局限,缺乏連接器和USB板外的用戶。

我們真的想盡量減少一個Arduino的成本。為了實現這一點,我們使用的所有貼片元件,使得兩層,等該板直接連接到FTDI基本接口板,並支持自動復位。 Arduino的臨迷你還與FTDI電纜,但FTDI電纜不帶出DTR引腳,因此自動復位功能將無法正常工作。機上有一個電壓調節器,因此它可以接受電壓高達12VDC。如果你提供不受管制的電源板,一定要連接到“RAW”端而非VCC。

這款主板的最新和最偉大的版本打破了ADC6和ADC7管腳以及增加腳印可選的I2C上拉電阻!我們也趁機用巴掌它OSHW標誌

注:本次出售的一部分返還給Arduino的有限責任公司,以幫助新的工具和新的IDE功能的基金持續發展。

尺寸:0.7x1.3“(18x33mm)

特徵:

  • ATmega328運行在與外部振盪器(0.5%容差)為16MHz
  • 0.8毫米薄PCB
  • USB連接斷板
  • 支持自動復位
  • 5V穩壓器
  • 最大150mA的輸出
  • 過電流保護
  • 重量小於2克!
  • DC 5V輸入高達12V
  • 板載電源和狀態LED
  • 模擬引腳:8
  • 數字I / O:14

文件:

前往
現貨型錄

Line share