DEV-09713 USB 32-Bit Whacker - PIC32MX795 Development

原名

貨號

DEV-09713

特價

資料來源：https://www.sparkfun.com/products/9713

The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and running. Power can be provided over USB or from an external source. It has 3 push buttons (Reset, and 2 user-defined buttons) and 5 LEDs (Power, USB, and 3 user defined LEDs). All of the 78(!) of the PIC32’s I/O pins are broken out. The board comes pre-loaded with a USB bootloader and special UBW firmware that accepts simple serial commands to control the various I/O functions.

If you have used a UBW or Arduino before and are frustrated by the lack of CPU power, lack of memory, lack of I/O pins, or lack of sophisticated software, the UBW32 is just what you are looking for! While only slightly more expensive than the 8-bit UBW, the UBW32 has significantly more I/O and CPU horsepower.

The UBW32 is also a very good stand-alone development platform for the USB PIC32 chip. It contains a simple to use USB bootloader so that you can write your own code and download it to the board without any additional programmer, tools, or software. If you need low-level debugging, you can also attach an ICD2/ICD3 or other PIC debugger.

The PIC32 chip is capable of doing USB OTG, USB Mass Store, USB Virtual Com Port and USB Host roles. There is a footprint on the bottom of the board for a USB connector that will allow you to plug any USB device into the UBW32. There is a jumper that allows you to power the VBUS 5V USB wire if you program your UBW32 to be a USB Host.

Note: This product is a collaboration with Brian Schmalz. A portion of each sales goes back to them for product support and continued development.

Features:

PIC32MX795
128KBytes of RAM
512KBytes of Flash
78 usable I/O pins
CPU runs at 80MHz
USB Bootloader

Documents:

該UBW32新版本現在使用IC PIC32MX795。基於布賴恩SCHMALZ的工作中，UBW32是從Microchip的新PIC32MX795 32位CPU的小開發板。該UBW32是麵包板友好，包括所有對PIC32和運行所需的外部電路。可以通過USB或從外部源提供動力。它具有3個按鈕（Reset以及2用戶定義按鈕）和5個LED（電源，USB和3個用戶定義的LED）。所有PIC32的I / O引腳的78（！）的被打破了。該板預裝了USB啟動加載器和特殊UBW固件接受簡單的串行命令來控制各種I / O功能。

如果你已經使用了UBW或Arduino的前，由於缺乏CPU供電，內存不足，缺少I / O引腳，或缺乏成熟的軟件感到沮喪時，UBW32只是你在找什麼！而只比8位UBW較貴，UBW32具有顯著更多的I / O和CPU馬力。

該UBW32也是用於USB PIC32芯片很好獨立開發平台。它包含使用USB引導程序，讓您可以編寫自己的代碼，並將其下載到主板無需任何額外的編程人員，工具或軟件的簡單。如果你需要低級別的調試，您還可以將一個ICD2 / ICD3或其他PIC調試器。

該PIC32芯片能夠做的USB OTG，USB大容量存儲，USB虛擬COM口和USB主機的角色。有在板底部的USB接口，讓你插入任何USB設備插入UBW32一個腳印。有一個跳線，可以讓你的VBUS 5V USB線，如果你計劃你的UBW32是一個USB主機電源。

注：本產品是與布賴恩SCHMALZ協作。每一個銷售的部分可以追溯到他們的產品支持和持續發展。

特徵：

PIC32MX795
內存128K字節
閃存512KBytes
78可用I / O引腳
CPU運行在80MHz
USB的Bootloader

文件：