官方授權台灣代理分銷
黑寡婦1.0
原名
BlackWidow 1.0
貨號
ARD125A2P
分類
Accessories for Ham Radio & Instruments
特價
3,218
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/BlackWidow-1.0-p-613.html
Description
The BlackWidow is an Arduino Duemilanove compatible clone that has 802.11b wireless connectivity baked directly onto the board. The components have been switched out for surface mount equivalents to free up space for the wireless module. It is fully compatible with the Processing/Wiring IDE. The BlackWidow will give your Arduino projects added wireless connectivity without the need for additional bulky shields!
Features:
- size compatible with existing Arduino Duemilanove and Diecimila boards
- up to 14 digital I/O pins[1]
- 6 analog input pins
- Atmel Mega 328P microprocessor
- 32KB flash RAM (2KB used for bootloader)
- 2KB SRAM
- 1KB EEPROM
- lower profile USB 5-pin mini-B connector
- auto-switchable power between USB and external DC power
- 2-pin JST connector allows for more varied external power options (JST to DC barrel jack, Litihium-ion battery pack, etc.)
- 802.11b 1 and 2 mbps wireless connectivity
- on-board PCB antenna
- switchable interrupt between INT0 and digital pin 8
- supports infrastructure mode (BSS) and adhoc (IBSS) network modes
- support for WEP, WPA, and WPA2 security
- LED attached to digital pin 9 used to indicate a successful wireless connection
[1]: For WiFi usage, a minimum of 5 digital pins are required: 4 for SPI and 1 for interrupt. The interrupt is switchable between digital pin 8 and digital pin 2. The SPI bus can be shared with other SPI devices, but the CS pin cannot be modified from pin 10. Your other SPI device must have a switchable SPI CS pin, or a hardware modification needs to be performed.
該黑寡婦是具有直接烤到電路板的802.11b無線連接一個Arduino Duemilanove兼容的克隆。該組件已被切換出表面貼裝當量，以釋放用於該無線模塊的空間。它與加工/接線IDE完全兼容。該黑寡婦會給你的Arduino的項目添加無線連接，而不需要額外的笨重的盾牌！
特徵：
- 尺寸與現有的Arduino Duemilanove和Diecimila板兼容
- 高達14數字I / O管腳[1]
- 6個模擬輸入引腳
- Atmel公司米加328P微處理器
- 32KB閃存RAM（2KB用於引導程序）
- 2KB SRAM
- 1KB EEPROM
- 放低姿態USB 5針mini-B連接器
- USB和外接直流電源之間的自動切換電源
- 2針JST連接器允許更多變化的外部電源選項（JST直流桶插孔，Litihium離子電池等）
- 802.11b的圖1和2 Mbps的無線連接
- 板載PCB天線
- INT0和數字引腳8之間切換中斷
- 支持基礎架構模式（BSS）和計劃外（IBSS）網絡模式
- 對於WEP，WPA和WPA2安全支持
- LED附連到用於指示一個成功的無線連接數字銷9
[1]：對於無線網絡的使用，都至少需要5數字引腳：4 SPI和1中斷。中斷是數字引腳8和數字引腳之間切換2. SPI總線可以與其他SPI設備共享，但CS引腳不能從銷10.修改了其他SPI設備必須有一個可切換的SPI CS引腳或硬件修改需要執行。
