官方授權台灣代理分銷
吸錫線
資料來源：https://www.seeedstudio.com/Desoldering-Wick-p-1437.html
Description
Desoldering wick for removing solder from printed circuit boards.
Features
- 1.5m length
- 3.0mm width
How to use
- Place the desoldering wick over the solder to be removed, then push the heated soldering iron tip onto the desoldering wick, the solder will be absorbed.
- Remove the desoldering wick after the solder has been absorbed.
- Cut off the used section of the wick using nippers.
- Repeat above steps if the solder is not removed completely. Absorbability may differ depending on the type of solder. Sn63% and 60% (tin content) have good absorbability.
Technical Details
| Dimensions | 60mm x 60mm x 10mm |
| Weight | G.W 12.5g |
| Battery | Exclude |
拆焊芯用於從印刷電路板中除去焊劑。
特徵
- 高1.5m的
- 3.0毫米寬度
如何使用
- 放置要除去的去焊芯在焊料，然後推加熱烙鐵頭到脫焊燈芯，焊料會被吸收。
- 取下吸錫焊料被吸收後。
- 切斷用鉗燃燒芯的使用部分。
- 重複上述步驟，如果焊料不能完全去除。吸收性可以取決於焊料的類型而有所不同。錫63％和60％（錫含量）具有良好的吸收能力。
