資料來源:https://www.seeedstudio.com/Raspberry-Pi-0.91%27OLED-Display-Module-p-2799.html
This tiny OLED display module is specially design for raspberry Pi,the module use less of raspberry pi's pins and make little spacing occupying,The micro control chip ssd1306 which communicate with Raapberry Pi via I2C interface ,and whose work voltage is 3.3V. So that this OLED can be used on any Raspberry Pi board.
Resolution: 128 x 32
I2C driver support
FP frequency: less than 1 fps
Wide range of operating temperature: -40°C to 85°C
Only use 5 pins to control OLED as showing below.
• screen type: 0.91
• diplay scale: 22.38×5.58MM
• module scale: 35.1x15.12x11.8mm
• Pixel Pitch: 0.17×0.17
• Pixel Size: 0.15×0.15
• work voltage: 3.3V
• Dimensions: 36.56mm x 14.87mm x 11.70(include header)mm
• Weight without package: 2.92±2g
1 x 0.91 Inch OLED Module
Dimensions | 95mm x 70mm x 20mm |
Weight | G.W 15.5g |
Battery | Exclude |
這個微小的OLED顯示模塊是專門設計用於樹莓派,該模塊使用較少的樹莓派的引腳,使小間距佔據,它通過I2C接口與Raapberry皮通信的微控制芯片ssd1306,且其工作電壓為3.3V。使此的OLED可以在任何樹莓皮板可以使用。
分辨率:128×32
I2C驅動程序支持
FP頻率:小於1 fps的
寬工作溫度範圍:-40°C至85°C
僅使用5個控制OLED如下顯示。
•屏幕類型:0.91
•diplay規模:22.38×5.58MM
•模塊規模:35.1x15.12x11.8mm
•點距:0.17×0.17
•像素尺寸:0.15×0.15
•工作電壓:3.3V
•尺寸:36.56毫米點¯x14.87毫米點¯x11.70(包括標題)毫米
•無包裝重量:2.92±2克
1個0.91英寸的OLED模塊