官方授權台灣代理分銷

樹莓派RGB1602液晶顯示模塊

原名
Raspberry Pi RGB1602 LCD Module

貨號
317080019

分類
Hats & Plates

特價
823

暫無庫存

SeeedStudio 目前暫時無庫存,因為該公司無法提供確切恢復供貨時間,為了避免延宕或出貨爭議,恕不提供下單代訂服務。

資料來源:https://www.seeedstudio.com/Raspberry-Pi-RGB1602-LCD-Module-p-2803.html

Description

Raspberry Pi RGB-LCD1602 module is designed specifically for the Raspberry Pi, , which has an optional three-color RGB (red, green, blub) backlight, you can choose according to different situations different colors, to meet the different needs of users, with three independent dimming pin, which could be mixed to form a more brilliant color. using a dot matrix liquid crystal display (LCD), displays 16 characters X2 line of characters, the character size is 2.95X4.35 (WXH) mm, built-HD44780 type LCD controller interfaces can be directly connected to the MCU.

Features.jpg

  • It's a LCD display which can show two lines and 16 characters on it. and it easy to use a blue and white 16x2 Character LCD.

  • It's based on I2c protocol and it can communicate with your Pi with less wire.

  • With this in mind, we wanted to make it easier for people to get these LCD into their projects so we devised a Pi plate that lets you control a 16x2 Character LCD,

  • up to 3 led pins(RGB backlight) AND 5 keypad pins with pull-up resister using only the two I2C pins on the R-Pi!

  • The best part is you don't really lose those two pins either, since you can stick i2c-based sensors, RTCs, etc and have them share the I2C bus.

  • This is a super slick way to add a display without all the wiring hassle. This pi plate is perfect for when you want to build a stand-alone project with its own user interface.

  • The 4 directional buttons plus select button allows basic control without having to attach a bulky computer.

  • The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins, RGB backlight is controlled by Raspberry Pi GPIO pin and you can make it as breath light with softPWM.

  • To keep them from shorting against the metal, a piece of electrical tape must be placed onto the USB ports.

Specification.jpg

  • Display construction: 16 Characters * 2 Lines

  • Dimensions: 5.74cm × 8.24cm

  • Comes with a 16x2 Blue & White LCD

  • Plug and play with any Raspberry Pi

  • Uses only the I2C (SDA/SCL) pins

  • This board/chip uses I2C 7-bit address 0x20

  • RBG backlight

  • Pluggable LCD1602 module

Part List.jpg

1 x RPI 16x2 LCD + Keypad Kit



Technical Details

Dimensions 125mm x 85mm x 42mm
Weight G.W 103g    
Battery Exclude

描述

樹莓派RGB-LCD1602模塊是專為樹莓派,其中有一個可選的三色RGB(紅,綠,泡殼)背光,可以根據不同的情況不同的顏色可供選擇,以滿足用戶的不同需求設計的,有三個獨立的調光針,這可能是混合,形成更加絢麗的色彩。使用點陣液晶顯示器(LCD),用於顯示字符的16個字符X2線,字符尺寸2.95X4.35(WXH)毫米,內置HD44780型LCD控制器接口可以直接連接到MCU。

Features.jpg

  • 這是一個液晶顯示屏,可以顯示兩行,並在其上16個字符。它易於使用藍白相間的16×2字符液晶。

  • 它是基於I2C協議,它可以與你的皮用更少的電線通信。

  • 考慮到這一點,我們想使人們更容易獲得這些LCD到他們的項目,所以我們設計了一個皮板,可以讓你控制一個16×2字符液晶,

  • 多達3只使用在R-丕兩個I2C引腳導致銷(RGB背光模組),並與上拉電阻5引腳鍵盤!

  • 最好的部分是你真的不失去這兩個引腳上,因為你能堅持基於I2C的傳感器,區域培訓中心等,並讓他們分享I2C總線。

  • 這是添加顯示沒有所有的佈線麻煩的超級光滑的方式。該PI板是完美的,當你想建立自己的用戶界面的獨立項目。

  • 4個按鍵加選擇按鈕可基本控制,而不必附加一個笨重的電腦。

  • 該板是專為修訂版1和修訂2樹莓派的。它使用I2C(SDA / SCL)引腳,RGB背光源是由樹莓派GPIO引腳控制,你可以把它與softPWM呼吸燈。

  • 為了防止他們做空對金屬,一塊電氣膠帶必須放置到USB端口。

Specification.jpg

  • 建築顯示:16個字符* 2行

  • 外形尺寸:5.74厘米×8.24厘米

  • 用16×藍色和白色LCD點亮

  • 即插即與任何樹莓派玩

  • 只使用I2C(SDA / SCL)引腳

  • 該主板/芯片採用I2C 7位地址為0x20

  • RBG背光

  • 可插拔模塊LCD1602

Part List.jpg

1個RPI 16×2 LCD +鍵盤套件

 

 
查看更多

前往
現貨型錄

Line share