官方授權台灣代理分銷

0.5英寸OLED顯示屏的Arduino屏蔽

原名
0.5 Inch OLED display Arduino shield

貨號
308020004

分類
Shields

特價
624

SeeedStudio 採購說明

本項商品目前在台灣無庫存,將採用空運方式進口再出貨。加計下單日期、報關手續及運送時程,預計大約 10 - 15 天內可以出貨給您。

我們將在您下單當日向 SeeedStudio 原廠確認庫存狀況,並且寄發接受訂單確認通知給您。

資料來源:https://www.seeedstudio.com/0.5-Inch-OLED-display-Arduino-shield-p-2194.html

Description

OCELL is a 0.5 inch OLED module designed as a  Arduino shield and also available for other  micro controllers . It is the smallest Arduino display module you can find so far.

You could connect it to Ardunio micro directly without doing any PCB layout and also available for other controllers . It is a good choice for a DIYer to make a project which need a tiny COOL OLED display.


Features 

  • The smallest size in all Arduino display modules so far.

  • Very high contrast and brightness.

  • Very low power consumption

  • No backlight required

  • Supported by U8glib library


High light

These OLED displays are small, only about 0.5"diameter, but very readable due to the high contrast (450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast and very low power consumption.

 

Specification

  • PCB dimensions: 17.8mm X 15.5mm

  • Screen size: 0.5 (inch) W. H: 15.30x10.20 mm

  • Color: Monochrome (white)

  • OLED  type: PM -OLED

  • OLED driver: LD7032

  • Pixels : 60 x 32

  • Contrast: 2000: 1

  • Communication: SPI, I2C


Note

  • 1 pc OCELL includes: 1x module PCB , 1x OLED display , 1x10 pins header

  • Does not include: Arduino 

 

Documents


Technical Details

Dimensions 80mm x 100mm x 3mm
Weight G.W 5g    
Battery Exclude

描述

oCell的是一個0.5英寸的OLED模塊設計成一個Arduino的盾牌,也可用於其它微控制器。它是最小的Arduino的顯示模塊,你可以找到為止。

你可以將其連接到直接Ardunio微沒有做任何的PCB佈局,也可用於其他控制器。它是一個DIYer們做一個項目,需要一個微小的COOL OLED顯示一個不錯的選擇。


特徵

  • 1.最小尺寸在目前為止的所有Arduino的顯示模塊。
  • 2.非常高的對比度和亮度。
  • 3.非常低的功耗
  • 4.無需背光源
  • 5.支持U8glib庫

高光

這些OLED顯示器是小的,僅約0.5“直徑,但非常可讀由於高對比度(為450cd /平方公尺亮度),這顯示是由60x32個別白光OLED像素,每一個由控制器接通或斷開芯片。因為顯示使得其自己的光,不需要背光,這降低了運行的OLED所需的功率,這就是為什麼在顯示具有這樣高對比度和非常低的功率消耗。

 

規範

  • PCB尺寸:17.8毫米點¯x15.5毫米
  • 屏幕尺寸:0.5(英寸)W·H:15.30x10.20毫米
  • 顏色:單色(白色)
  • OLED類型:PM -OLED
  • OLED驅動器:LD7032
  • 像素:60×32
  • 對比度:2000:1
  • 通訊:SPI,I2C


注意

1件oCell的包括:1個模塊PCB,1個OLED顯示屏,1×10引腳頭

不包括:Arduino的

 

DOCUMENTS

U8glib庫下載: 圖書館

U8lib libary WIKI: https://code.google.com/p/u8glib/wiki/gallery

oCell的用戶指南: UESR指南 0.5 OLED規格 設備 規格

對於任何技術支持或建議,請您去我們的論壇

查看更多

前往
現貨型錄

Line share