資料來源:https://www.seeedstudio.com/Pimoroni-pHAT-DAC-p-3004.html
If music be the food of love, play on. But make sure you use this super little DAC to get the best out of your Raspberry Pi audio!
This pHAT provides a super affordable high-quality DAC for your Raspberry Pi. It pumps out 24-bits at 192KHz from the Raspberry Pi's I2S interface on its 2x20 pin GPIO header.
Use pHAT DAC to build a tiny, lush-sounding streaming music device, or use it with Scroll pHAT to make a beautiful spectrum analyser!
Features
24-bit audio at 192KHz
Line out stereo jack
Optional landing for dual RCA phono connector
PCM5102A DAC over the Raspberry Pi's I2S interface
Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W
Female header requires soldering
Software
pHAT DAC doesn't require a Python library like most of our other HATs and pHATs, but does require configuration to work properly. We've put together a slick one-line installer to get everything set up just right. See the tutorial below for more details.
Our software does not support Raspbian Wheezy.
Dimensions | 65mm x 30mm x 10mm |
Weight | G.W 13g |
Battery | Exclude |
pHAT DAC | 1 |
2 x 20 pin header | 1 |
如果音樂是愛的食物,那就玩吧。但是請確保使用這個超級小DAC來充分利用您的Raspberry Pi音頻!
這款pHAT為您的Raspberry Pi提供超級實惠的高品質DAC。它在2x20引腳的GPIO接頭上從Raspberry Pi的I2S接口以192KHz的速率抽出24位數據。
使用pHAT DAC構建一個小型,鬱鬱蔥蔥的音樂流式音樂設備,或者將其與Scroll pHAT一起使用,製作一個美麗的頻譜分析儀!
特徵
在192KHz的24位音頻
排出立體聲插孔
雙RCA唱機連接器可選
PCM5102A DAC覆蓋Raspberry Pi的I2S接口
與Raspberry Pi 3,2,B +,A +,Zero和Zero W兼容
女頭需要焊接
軟件
pHAT DAC不需要像大多數其他HAT和pHAT一樣的Python庫,但需要配置才能正常工作。我們已經組建了一個光滑的單行安裝程序,使一切正確的設置。請參閱下面的教程了解更多詳情。
我們的軟件不支持Raspbian Wheezy。