資料來源:https://www.seeedstudio.com/Bit%3ABot---Robot-Kit-for-Micro%3ABit-p-3015.html
Fully-integrated robot for the micro:bit.
This (almost) ready-assembled robot requires no soldering, no wires and nothing more than a screwdriver to complete it.
The Bit:Bot fully engages children and adults alike, allowing you to explore and code the micro:bit using any of the languages available (not all features are supported in all languages).
Features:
2 micro-metal gear motors. Both fully controllable in software, for both speed (0 to 100%) and direction (forward or reverse)
Wheels with rubber tyres for maximum grip
Really smooth metal ball front caster
12 mini neopixels in 2 sets of 6 along the arms either side. Select any colour for any pixel, produce stunning lighting effects as your Bit:Bot moves around
2 digital line-following sensors. Code your own line-following robots and race them to see whose code produces the fastest lap time!
2 analog light sensors (front left and front right) so your Bit:Bot can be programmed to follow a light source such as a torch, or you could code it to go and hide in the darkest place it can find
Buzzer, so you can make beeping sounds whenever you want
Powered from integrated 3xAA battery holder with on/off switch and blue indicator LED
Easily plug your micro:bit in and out using the edge connector
Expansion connections at the front for additional sensors (ultrasonic rangefinder available now, more in development)
Includes an ultrasonic distance sensor (rangefinder) module.
Note: micro:bit is NOT included!
Dimensions | 188mm x 123mm x 24mm |
Weight | G.W 153g |
Battery | Exclude |
Driver Board (assembled motor) | 1 |
wheel | 2 |
bettery case | 1 |
nuts | 4 |
screws | 4 |
Ultra Sonic range module | 1 |
Omni-directional wheel kit | 1 |
全集成機器人微: 位。
這個 (幾乎) 現成的機器人不需要焊接, 沒有電線, 只有螺絲刀才能完成。
比特: 機器人充分參與兒童和成人一樣, 讓您探索和編碼的微: 位使用任何可用的語言 (不是所有的功能都支援所有語言)。
功能:
2微型金屬齒輪馬達。兩個完全可控的軟體, 為兩個速度 (0 到 100%) 和方向 (向前或反向)
車輪與橡膠輪胎的最大抓地力
真正光滑的金屬球前腳輪
12迷你 neopixels 在2套6沿雙臂兩側。選擇任何顏色的任何圖元, 產生驚人的照明效果為您的位: 機器人移動周圍
2數位線跟隨的感應器。代碼你自己的線跟蹤機器人和比賽他們看到誰的代碼產生最快的圈時間!
2類比光感應器 (前左和右前方) 所以你的位: 機器人可以程式設計遵循一個光源, 如火炬, 或者你可以編碼它去和隱藏在最黑暗的地方, 它可以找到
蜂鳴器, 所以你可以發出嘟嘟聲, 每當你想
電源從集成的3xAA 電池持有人與開/關開關和藍色指示燈指示燈
使用邊緣連接器輕鬆插入微: 鑽頭進出
擴展連接在前面為另外的感應器 (現在可利用的超聲波測距儀, 更多在發展)
包括超聲波測距感應器 (測距) 模組。
注: 微: 鑽頭不包括在內!
尺寸 | 188mm x 123mm x 24mm |
重量 | G. W 151.5g |
電池 | 排除 |
驅動板 (裝配馬達) | 1 |
輪 | 2 |
電池案例 | 1 |
堅果 | 4 |
螺釘 | 4 |
超音波測距模組 | 1 |
全方位砂輪套件 | 1 |