A beautifully modern Mood Light that'll look great on your bedside table, bookcase, or desk, and it's internet-connected!
Our Mood Light Kit has everything* you'll need to build a sleek looking light that evokes a real pendant light, and uses our Unicorn pHAT board with 32 programmable RGB Neopixel LEDs. Set it to a single colour, have it fade through all the colours of the rainbow, or harness the built-in wireless LAN on the Pi Zero W. It'll take around 30 minutes to assemble everything** (check out our assembly guide for details).
Mood Light uses our popular Unicorn pHAT board, with 32 programmable RGB Neopixel LEDs, giving you a veritable rainbow full of colour possibilities. The stand cleverly mounts the Pi Zero W and Unicorn pHAT at just the right angle to cast the light through the pendant light cutout and diffuse it beautifully.
The built-in wireless LAN on the Pi Zero W opens up a wealth of opportunities: connect it to your Twitter feed and track the mood of your recent tweets, or fade through the sunset and sunrise colours once you've pulled the daily sunset/sunrise times from your favourite weather server.
Note that this is a soldering project.
Features
8x4 matrix of programmable RGB Neopixel LEDs
3-layer white and yellow pendant light stand and diffuser
Pi Zero W with single core CPU and built-in wireless LAN and Bluetooth
Adaptor kit
50cm USB A to micro-B cable (power your Pi from an existing charger or computer)
Python library
Female and male headers require soldering
Dimensions | 145mm x 90mm x 40mm |
Weight | G.W 287g |
Battery | Exclude |
Clear frosted front layer | 1 |
Yellow lamp fitting insert | 1 |
White middle layer | 1 |
White back layer | 1 |
White leg retainers | 2 |
White legs with rubber feet attached | 2 |
M3 white nylon bolts and nuts | 6 |
M2.5 white nylon bolts and nuts | 4 |
Pi Zero W | 1 |
Unicorn pHAT with 32 programmable RGB Neopixel LEDs | 1 |
Male and female 2x20 pin headers | 1 |
White and yellow pendant light stand and diffuser | 1 |
50cm USB A to micro-B cable | 1 |
USB A (female) to micro B (male) adaptor | 1 |
Mini to full-size HDMI adaptor | 1 |
Sticker sheet (personalise your Mood Light!) | 1 |
Comes in a reusable kit box | 1 |
一個美麗的現代心情燈,看起來很棒你的床頭櫃,書櫃或書桌,它是互聯網連接!
我們的心情燈套裝有一切*您需要搭建一個光滑的燈光,喚起真正的吊燈,並使用我們的Unicorn pHAT板與32個可編程RGB Neopixel LED。將其設置為單一顏色,使其褪色彩虹的所有顏色,或利用Pi Zero W上的內置無線LAN。組裝所有內容約需30分鐘(查看我們的組裝指南詳情)。
Mood Light使用我們受歡迎的Unicorn pHAT板,配有32個可編程RGB Neopixel LED,為您帶來色彩鮮豔的彩虹色彩。支架巧妙地將Pi Zero W和Unicorn pHAT以正確的角度安裝,將光線通過吊燈切割並將其精美地擴散。
Pi Zero W上的內置無線局域網打開了很多機會:將其連接到您的Twitter Feed,並跟踪您最近的推文的心情,或者在日落日落/您最喜歡的天氣服務器的日出時間。
請注意 ,這是一個焊接項目。
特徵
8x4可編程RGB Neopixel LED矩陣
3層白色和黃色吊燈和擴散器
Pi Zero W採用單核CPU和內置無線局域網和藍牙
適配器套件
50厘米USB A到micro-B電纜(從現有充電器或電腦為您的Pi供電)
Python庫
女性和男性頭部需要焊接