官方授權台灣代理分銷

輕拂大型 - 獨立的3D跟踪和手勢突破

原名
Flick Large – Standalone 3D Tracking and Gesture Breakout

貨號
114991398

分類
Hats & Plates

特價
1,697

暫無庫存

SeeedStudio 目前暫時無庫存,因為該公司無法提供確切恢復供貨時間,為了避免延宕或出貨爭議,恕不提供下單代訂服務。

資料來源:https://www.seeedstudio.com/Flick-Large-%E2%80%93-Standalone-3D-Tracking-and-Gesture-Breakout-p-2952.html

Description

Swipe, tap or flick your wrist to control your I2C device with the Flick Large board.


Flick Large is a 3D tracking and gesture board that lets you control your I2C enabled devices as if by magic!


Flick uses technology that enables the PCB to detect your gestures from up to 15cm away in 3D space. Draw a circle, swipe your hand – Flick will track it.


Integrate Flick into your I2C project to give you multiple ways of controlling it. Using the near field gesture technology, you’re able to hide your project behind non-conductive material (wood/acrylic) and still use Flick (please note however that mounting it in this way may reduce the sensor range).


Plug and play functionality allows you to get up and running within minutes. Use our software libraries (complete with one-line installer) to fully explore what you can do with Flick. Control your computer, TV, music system and more all with a Flick of the wrist!



Features

•Compatible with Raspberry Pi, BeagleBone, Arduino, Genuino or any I2C enabled device

•3D tracking

•Gesture sensing up to 15cm

•Touch and Tap sensing

•Communicates with the Raspberry Pi via I2C

•Full software libraries (fully open-source code)

•No soldering required

•Dimensions: 14.8 cm x 10.4cm x 0.5cm

•Level shifting chip to enable board to work with 3V3 or 5V0 power and logic

•Orange/green dual colour LED on board

•One line installer

•Fully CE and FCC tested and approved


Technical Details

  • Chip: MGC3130 3D Tracking and Gesture Controller

  • Detection range:0 to 15 cm in ideal circumstances

  • Temperature Range:-20℃ to +85℃

  • Position Rate:200 positions/sec

  • Spatial Resolution:up to 150 dpi

  • Proximity and Touch Sensing

  • Flick Large has a red/green dual colour LED that can be driven using pins LED1 and LED2

  • Flick Large has level shifting on board so can work with any microcontroller with either 5V or 3V3 power and data signals

  • Compatible with the Hillstar Development Kit over USB on PC in order to use with a computer or to program new firmware onto the board.

  • Available gestures: Swipe (east to west, west to east, north to south, south to north), tap and double tap (center, east, west, north, south), airwheel (clockwise, anti-clockwise) and touch (center, east, west, north, south)

  • Works even through the Flick Large case

  • No detection blind spots






Technical Details

Dimensions 205mm x 125mm x 25mm
Weight G.W 130g    
Battery Exclude

Part List

Flick Large 1
Jumper cable female to female 1
Jumper cable female to male 1
Stickers 3
Info cards 2

描述

滑動,輕敲或輕拂手腕,使用Flick Large板控制I2C設備。


Flick Large是一款3D跟踪和手勢板,可讓您控制I2C啟用的設備,如同魔術般!


Flick使用技術,使PCB能夠在3D空間中從多達15cm的距離檢測您的手勢。畫一個圓圈,滑動你的手 - Flick會跟踪它。


將Flick集成到您的I2C項目中,為您提供多種控制方式。使用近場手勢技術,您可以將項目隱藏在非導電材料(木材/丙烯酸)之後,仍然使用Flick(請注意,以這種方式安裝可能會降低傳感器範圍)。


即插即用功能可讓您在幾分鐘之內起床和運行。使用我們的軟件庫(完整的單行安裝程序)來充分探索您可以用Flick做什麼。控制您的電腦,電視,音樂系統等等,所有與手腕輕彈!



特徵

•與Raspberry Pi,BeagleBone,Arduino,Genuino或任何支持I2C的設備兼容

•3D跟踪

•手感可達15cm

•觸摸並點擊感應

•通過I2C與Raspberry Pi通訊

•完整的軟件庫(完全開放源代碼)

•無需焊接

•尺寸:14.8厘米x 10.4厘米x 0.5厘米

•電平轉換芯片,使電路板工作在3V3或5V0電源和邏輯

•船上橙色/綠色雙色LED

•一線安裝

•完全通過CE和FCC測試和認證


技術細節

  • 芯片:MGC3130 3D跟踪和手勢控制器

  • 檢測範圍:理想情況下0〜15厘米

  • 溫度範圍:-20℃至+ 85℃

  • 位置率:200位/秒

  • 空間分辨率:高達150 dpi

  • 接近和触摸感應

  • Flick Large具有紅色/綠色雙色LED,可以使用LED1和LED2引腳驅動

  • Flick Large具有電平變化,因此可以與任何具有5V或3V3電源和數據信號的微控制器配合工作

  • 通過USB在PC上與Hillstar開發套件兼容,以便與計算機一起使用或將新固件編程到板上。

  • 可用手勢:滑動(東西向西,東向東,北向南,南向北),水龍頭(中,東,西,北,南),風車(順時針,逆時針)和触摸(中心) ,東,西,北,南)

  • 即使通過Flick Large案例也可以工作

  • 無檢測盲點





前往
現貨型錄

Line share