官方授權台灣代理分銷

樹莓派專用 RF Explorer 3G+ IoT 物聯網頻譜分析儀

原名
RF Explorer 3G+ IoT Shield for Raspberry Pi

貨號
114990814

分類
Spectrum Analyzers

特價
4,000

資料來源:https://www.seeedstudio.com/RF-Explorer-3G%2B-IoT-Shield-for-Raspberry-Pi-p-2770.html

Description

标签1.jpg

RF Explorer 3G+ IoT modules are ready to use, advanced Spectrum Analyzer devices you can configure and control any way you want, from an Arduino, Raspberry Pi, or any other programming platform.

These modules are cost-effective platforms to develop your own customized Spectrum Analyzer, Power Detector, RF activity alarm, RF sniffer, RF QA test bench, etc.

Programmability and network capabilities of the hosting platform enables remote control and diagnosis scenarios, fully automated RF alarm systems, advanced assistance for unattended detection requirements such as those of radio operators, cell towers and HAM stations.

图片2.jpg

标签2.jpg

RF Explorer 3G+ IoT boards are delivered in two modes configuration modes:

  • Raspberry Pi

  • Arduino and compatible boards (3.0 – 3.3V only)

We recommend Raspberry Pi mode for advanced usage and more powerful libraries, and Arduino for simpler, non-Linux software libraries related development.

For best flexibility, these two boards can be easily re-converted between modes by soldering a required connector:

  • Raspberry Pi Hat can be converted to Arduino Shield by soldering standard 0.1” male headers to the PCB

  • Arduino Shield can be converted to Raspberry Pi Hat by soldering a 13x2 0.1” female header to the PCB

Designed in this way, it is easy to reconvert the board to a different hosting platform with no extra cost if you have different needs down the road.

图片1.jpg

Furthermore, other platforms such as BeagleBone, Chip, Chipkit, Teensy all them can easily control a RF Explorer 3G+ IoT by manually connecting to a standard UART port. Visit here for more details and examples.

图片3.jpg


标签3.jpg

  • Design and customize your own Spectrum Analyzer, RF Detector, RF Sniffer, etc

  • Open source design, open source libraries and examples

  • Supported by all Raspberry Pi boards.

  • Can update IoT firmware directly from Raspberry Pi no other accessories required

  • Flexible board: can be connected to a Raspberry Pi by soldering a compatible female header

  • Recommend to select SMA antennas for specific application

  • IMPORTANT: In Raspberry Pi 3, WiFi should be shutdown to avoid interference with the analyzer.

标签4.jpg

表格.jpg

标签5.jpg

1 x RF Explorer 3G+ IoT shield for Raspberry Pi

Library and Python examples are at Github.


Techsupport

This product is designed by RF-Explorer,

  • For more info and to get started with your RF Explorer, visit the start page.

  • For questions and support, please visit https://support.rf-explorer.com.

  • For the software for RF Explorer series, please click the following logo for more information: 

 



Related Products

RF Explorer 3G+ IoT Shield for Arduino


If you'd like to buy or change the RF Explorer Battery, please click here.



Technical Details

Weight G.W 56g    
Battery Exclude

Part List

1

描述

标签1.jpg

射頻資源管理器中3G +物聯網模塊,就可以使用,先進的可配置和控制任何你想要的頻譜分析儀的設備,從一個Arduino,樹莓派,或任何其他的編程平台。

這些模塊具有成本效益的平台開發自己的定制化頻譜分析儀,功率檢測器,RF活動報警器,RF嗅探器,RF QA測試台等等。

主機平台的可編程性和網絡功能,實現遠程控制和診斷方案,全自動射頻防盜系統,無人值守的檢測要求,如無線電運營商,手機發射塔和HAM電台先進的援助。

图片2.jpg

标签2.jpg

射頻資源管理器中3G +物聯網板在兩種模式下配置方式提供:

  • 樹莓派

  • 的Arduino兼容板(3.0 - 3.3V只)

我們建議樹莓派模式,先進的使用和更強大的庫,以及Arduino的相關開發更簡單,非Linux的軟件庫。

對於最好的靈活性,這兩個板可容易地模式之間通過焊接所需連接器重新轉換:

  • 樹莓派帽子可以通過焊接標準0.1“公頭到PCB轉換為Arduino的盾牌

  • Arduino的盾牌可以通過焊接一個13x2 0.1“母頭到PCB轉換為樹莓派帽子

這樣設計的,它很容易董事會重新轉換到不同的主機平台,無需支付額外費用,如果你有不同的需求的道路。

图片1.jpg

此外,其他平台如BeagleBone,芯片,Chipkit,Teensy他們都可以很容易地通過手動連接到一個標準的UART口控制射頻資源管理器中3G +物聯網。參觀這裡的更多細節和例子。

图片3.jpg

 

标签3.jpg

  • 設計和定制自己的頻譜分析儀,射頻檢測器,RF嗅探器等

  • 開源設計,開放源碼庫和示例

  • 所有樹莓派板支持。

  • 需要可以直接從樹莓派更新固件物聯網沒有其他配件

  • 撓性板:可通過焊接兼容的母頭連接到樹莓派

  • 建議選擇特定的應用SMA天線

  • 重要信息:在樹莓派3,無線網絡應被關閉,以避免與分析儀的干擾。

标签4.jpg

表格.jpg

标签5.jpg

1個RF資源管理器中3G +物聯網盾的Arduino

 

關於技術支持或問題,請訪問這裡

 

 
查看更多

前往
現貨型錄

Line share