114990772 ESP-32S Wifi Bluetooth Combo Module推薦購買價格代理

原名

貨號

114990772

分類

Wifi

特價

資料來源：https://www.seeedstudio.com/ESP-32S-Wifi-Bluetooth-Combo-Module-p-2706.html

Description

未标题-4.jpg

未标题-3.jpg

ESP-32S Wifi Bluetooth combo module is ultra high performance and ultra low-power consumption Wi-Fi and Bluetooth combo wireless platform based on ESPRESSIF ESP32 chipset. ESP-32S integrates dual-core processor, 448 KByte ROM,520 KByte SRAM,16 KByte SRAM in RTC, 802.11 b/g/n/e/I Wi-Fi, Bluetooth v4.2 BR/EDR & BLE, clocks & Times, abundant peripheral Interfaces and sercurity mechanism.

ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video steaming for camera, Wi-Fi & Bluetooth enabled devices, Home automation and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides.

ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra low power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles.

ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies minimal Printed Circuit Board (PCB) area.

ESP32 is designed for mobile, wearable electronics, and Internet of Things (IoT) applications. It has many features of the state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.

CPU and Memory: Xtensa® 32-bit LX6 Dua-core processor, up to 600 DMIPS.
448 KByte ROM
520 KByte SRAM
16 KByte SRAM in RTC.
QSPI can connect up to 4* Flash/SRAM, each flash should be less than 16 Mbytes.
Supply Voltage: 2.2V~3.6V

802.11 b/g/n/e/i
802.11 n (2.4 GHz), up to 150 Mbps
802.11 e: QoS for wireless multimedia technology.
WMM-PS, UAPSD
MPDU and A-MSDU aggregation
Block ACK
Fragmentation and defragmentation
Automatic Beacon monitoring/scanning
802.11 i security features: pre-authentication and TSN
Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
Infrastructure BSS Station mode/SoftAP mode
Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
UMA compliant and certified
Antenna diversity and selection

Compliant with Bluetooth v4.2 BR/EDR and BLE specification
Class-1, class-2 and class-3 transmitter without external power amplifier
Enhanced power control
+10 dBm transmitting power
NZIF receiver with -98 dBm sensitivity
Adaptive Frequency Hopping (AFH)
Standard HCI based on SDIO/SPI/UART ? High speed UART HCI, up to 4 Mbps
BT 4.2 controller and host stack
Service Discover Protocol (SDP)
General Access Profile (GAP)
Security Manage Protocol (SMP)
Bluetooth Low Energy (BLE)
ATT/GATT
HID
All GATT-based profile supported
SPP-Like GATT-based profile
BLE Beacon
A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
CVSD and SBC for audio codec
Bluetooth Piconet and Scatternet

Internal 8 MHz oscillator with calibration
Internal RC oscillator with calibration
External 2 MHz to 40 MHz crystal oscillator
External 32 kHz crystal oscillator for RTC with calibration
Two timer groups, including 2 x 64-bit timers and 1 x main watchdog in each group
RTC watchdog

12-bit SAR ADC up to 18 channels
2 × 8-bit D/A converters
10 × touch sensors
Temperature sensor
4 × SPI, 2 × I2S, 2 × I2C, 3 × UART
1 host (SD/eMMC/SDIO), 1 slave (SDIO/SPI)
Ethernet MAC interface with dedicated DMA and IEEE 1588 suppor
CAN 2.0
IR (TX/RX)
Motor PWM, LED PWM up to 16 channels
Hall sensor
Ultra low power analog pre-amplifier

IEEE 802.11 standard security features all supported, including WFA, WPA/WPA2 and WAPI
Secure boot
Flash encryption
1024-bit OTP, up to 768-bit for customers
Cryptographic hardware acceleration: -AES-HASH(SHA-2) library-RSA-ECC-Random Number Generator (RNG)

SDK Firmware for fast on-line programming
Open source toolchains based on GCC

Generic low power IoT sensor hub
Generic low power IoT loggers
Video streaming from camera
Over The Top (OTT) devices
Music players - Internet music players - Audio streaming devices
Wi-Fi enabled toys - Loggers - Proximity sensing toys
Wi-Fi enabled speech recognition devices
Audio headsets
Smart power plugs
Home automation
Mesh network

The size of ESP-32S Wifi module is 16mm x 24mm x 3mm.
The ESP-32S deploys 4MB SPI Flash with WSOP－8 package. It also uses 3DBi PCB antenna on board.

Technical Details

Dimensions	16mm x 24mm x 3mm
Weight	G.W 1.5g N.W 1.5g
Battery	Exclude

Part List

ESP-32S Wifi Bluetooth Combo Module	1
ESP-32S Breakout Board	1

描述

ESP3212 無線藍牙二合一模塊是基於 ESPRESSIF ESP32 芯片組的超高性能和超低功耗的 Wi-Fi 和藍牙組合的無線平台。ESP-3212 集成了雙核處理器、448 KByte ROM、520 KByte SRAM、在 RTC 中有 16 KByte SRAM、802.11 b/g/n/e/I Wi-Fi、Bluetooth v4.2 BR/EDR & BLE、時鐘及計時、豐富的外設接口和安全機制。

ESP3212 Wifi Bluetooth 組合模組提供 SDK 固件基於 GCC 支持發展快速在線編程和開源工具鏈。它是專為通用的低功耗傳感器物聯網中心，記錄儀，攝像視頻串流，支持 Wi-Fi 及藍牙功能的設備，家庭自動化和網狀網絡應用，針對製造商，硬件工程師，軟件工程師和提供解決方案。

ESP32 是一種單芯片的 2.4GHz Wi-Fi 和藍牙組合芯片設計與台積電的超低功耗 40 納米技術。它針對各種各樣的應用及和不同的功率特徵進行設計與優化，達到最佳功率性能、RF 性能、強固性，通用性，功能性、可靠性。

ESP32 在 Wi-Fi + Bluetooth 應用時少於10 個外部元件，是業內集成度最高的解決方案。ESP32 集成了天線開關，RF balun，功率放大器，低噪聲接收放大器，濾波器和電源管理模塊。如此一來，整個解決方案佔用極少的印刷電路板（PCB）面積。

ESP32 是專為移動，可穿戴電子和物聯網（IOT）應用互聯網。它有最先進的低功耗芯片的許多功能，包括高分辨率時鐘門控，電源模式和動態功率縮放。

•CPU和內存：Xtensa®32位LX6杜阿核處理器，最高可達600 DMIPS。
•448 K字節ROM
•520 K字節SRAM
•在RTC 16K字節的SRAM。
•QSPI最多可連接4 *閃存/ SRAM，閃存的每個應小於16兆字節。
•電源電壓：2.2V〜3.6V

•802.11 B / G / N / E / I
•802.11 N（2.4千兆赫），高達150 Mbps
•802.11 E：無線多媒體技術的QoS。
•WMM-PS，UAPSD
•MPDU和A-MSDU聚集
•塊的ACK
•碎片和碎片整理
•自動監測信標/掃描
•802.11我的安全功能：預認證和TSN
•Wi-Fi保護訪問（WPA）/ WPA2 / WPA2企業版/ Wi-Fi保護設置（WPS）
•基礎設施BSS站模式/ SoftAP模式
•Wi-Fi直（P2P），P2P發現，P2P集團所有者模式和P2P電源管理
•UMA標準和認證
•天線分集和選擇

•符合藍牙V4.2 BR / EDR和BLE規範
•類1，類2類和3發射器無需外部功率放大器
•增強的功率控制
•+ 10dBm的發射功率
•與-98 dBm的靈敏度NZIF接收器
•自適應跳頻（AFH）
•標準HCI基於SDIO / SPI / UART？高速UART HCI，最高達4Mbps
•BT 4.2控制器與主機棧
•服務發現協議（SDP）
•通用訪問配置文件（GAP）
•安全管理協議（SMP）
•藍牙低功耗（BLE）
•ATT / GATT
•HID
•所有基於GATT矚目的支持
•基於GATT-SPP-狀輪廓
•BLE燈塔
•A2DP / AVRCP / SPP，HSP / HFP，RFCOMM
•CVSD和SBC的音頻編解碼器
•藍牙微微網和散射

•內部8 MHz振盪器與校準
•內部RC振盪器校準
•外部2 MHz至40 MHz晶振
•外部32 kHz晶振為RTC與校準
•兩個定時器團體，包括每組2個64位定時器和1個主看門狗
•RTC看門狗

•12位SAR ADC多達18通道
•2×8位D / A轉換器
•10×觸摸傳感器
•溫度傳感器
•4×SPI，2×I2S，2×I2C，3×UART
•1主機（SD /的eMMC / SDIO），1個從站（SDIO / SPI）
•專用DMA和IEEE 1588 suppor以太網MAC接口
•CAN 2.0
•IR（TX / RX）
•電機PWM，LED PWM多達16個通道
•霍爾傳感器
•超低功耗模擬前置放大器

•IEEE 802.11標準安全功能，所有支持，包括WFA，WPA / WPA2和WAPI
•安全啟動
•閃存加密
•1024位OTP，高達768位客戶
•加密硬件加速：-AES-HASH（SHA-2）庫-RSA-ECC，隨機數發生器（RNG）

•SDK固件快速在線編程
•基於GCC開源工具鏈

•通用的低功耗傳感器物聯網樞紐
•通用的低功耗物聯網記錄儀
•視頻從攝像機流
•過頂（OTT）設備
•音樂播放器-網絡音樂播放器-音頻流媒體設備
•支持Wi-Fi的玩具-記錄儀-接近感應玩具
•支持Wi-Fi的語音識別設備
•音頻耳機
•智能電源插頭
•家庭自動化
•Mesh網絡

•ESP-3212無線模塊的大小為16mm點¯x24毫米x 3mm的。
•在ESP-3212部署4MB SPI閃存與WSOP-8封裝。它還使用3DBi PCB天線在船上。

零件清單

•1 ESP3212無線藍牙組合模塊