資料來源:https://www.seeedstudio.com/Genuino%C2%A0101-p-2628.html
Genuino 101 is a learning and development board that delivers the performance and low-power consumption of the Intel® Curie™ Module with the simplicity of Arduino at an entry-level price.
It combines the ease-of-use of the classic boards with the latest technologies. The board recognises gestures, and features a six-axis accelerometer and gyroscope. Control your projects with your phone over Bluetooth connectivity!
The module contains two tiny cores, an x86 (Quark) and a 32-bit ARC architecture core, both clocked at 32MHz. The Intel toolchain compiles your Arduino sketches optimally across both cores to accomplish the most demanding tasks.
The Real-Time Operating Systems (RTOS) and framework developed by Intel is scheduled to be open sourced in March 2016. Until then, it's not possible to interface with it directly; only the Arduino core can do it via static mailboxes, so it can only accomplish a predefined list of tasks (interface with PC using USB, program the sketch into flash, expose Bluetooth LE functionality to sketch, perform PWM). The RTOS for Intel Curie is still under development and new functions and features will be released in the near future.
The 101 comes with 14 digital input/output pins (of which 4 can be used as PWM outputs), 6 analog inputs, a USB connector for serial communication and sketch upload, a power jack, an ICSP header with SPI signals and I2C dedicated pins.
The board operating voltage and I/O is 3.3V but all pins are protected against 5V overvoltage.
Features
Microcontroller: Intel® Curie™
Operating Voltage: 3.3V (5V tolerant I/O)
Input Voltage (recommended): 7-12V
Input Voltage (limit): 7-20V
Digital I/O Pins: 14 (4 provide PWM output)
PWM Digital I/O Pins: 4
Analog Input Pins: 6
DC Current per I/O Pin: 20 mA
Flash Memory: 196 kB
SRAM: 24 kB
Clock Speed: 32MHz
Bluetooth LE
6-axis accelerometer/gyro
Note
The Genuino 101 is only available for customers outside the US.
Part List
1 x Genuino 101
Dimensions | 80mm x 60mm x 20mm |
Weight | G.W 35g |
Battery | Exclude |
Genuino 101是一個學習和開發板,提供英特爾®居里™模塊的Arduino的簡單的性能和低功耗以入門級的價格。
它結合了易於使用的經典板與最新的技術。董事會認識到手勢,並配有六軸加速度計和陀螺儀。控制你的項目,你的手機通過藍牙連接!
該模塊包含兩個小內核,在x86(夸克)和一個32位的ARC架構核心,兩個主頻為32MHz的。英特爾工具鏈優化編譯您的Arduino草圖跨兩個內核來完成的最艱鉅的任務。
由英特爾開發的實時操作系統(RTOS)和框架定於開源在2016年三月之前,它不可能直接與它進行對接;只有Arduino的內核可以通過靜態郵箱做到這一點,所以它只能完成任務的預定義列表(使用USB PC,計劃草圖到閃存接口,藍牙暴露LE功能素描,執行PWM)。該RTOS英特爾居里仍在發展和新的功能和特性將在不久的將來發布。
101配備了14路數字量輸入/輸出引腳(其中4個可以用作PWM輸出),6個模擬輸入,串行通信和草圖上傳,電源插孔,ICSP標頭SPI信號和I2C專用引腳USB連接器。
董事會的工作電壓和I / O電壓為3.3V,但所有引腳針對5V過壓保護。
特徵:
注意:
部分名單: