It is a good plastic box for Raspberry Pi A Plus, which can protect it with one of these snazzy plastic enclosures?. These cases protect the Raspberry Pi from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together.
The enclosure provides slots to access the peripheral header, USB ports, Ethernet, SD card, HMDI, composite video, audio, CSI and JTAG connectors as well as feet and vents to ensure the board gets proper cooling and plus-shaped wall mounting slots. All of the status LEDs on the Pi are visible through the case thanks to light pipes embedded in the design. This is a really slick case and once you've gotten your hands on a Raspberry Pi A Plus, you'll want to snag one of these to put it in!
Features:
3mm acrylic
Light and easy to transport
good heat dispersion
Size: 74 x 66 x 29.5mm
Part List:
1 x Acrylic set
Technical Details
Dimensions
70mm x 65mm x 12mm
Weight
G.W 47g
Battery
Exclude
描述
這是一個很好的塑膠盒的覆盆子 Pi a Plus, 可以保護它與這些時髦的塑膠外殼之一?。這些情況下保護覆盆子 Pi 的東西, 如流氓電線可能短路, 而仍然允許完全進入董事會!只需將物價指數到主機殼的下半部分, 然後將左右對齊。
主機殼提供插槽以訪問週邊報頭、USB 埠、乙太網、SD 卡、HMDI、複合視頻、音訊、CSI 和 JTAG 連接器以及腳和通風口, 以確保主機板獲得適當的冷卻和加形的壁掛式安裝槽。由於在設計中嵌入了光管, Pi 上的所有狀態指示燈都是可見的。這是一個非常光滑的情況下, 一旦你得到了你的手在一個樹莓 Pi 一個加號, 你會想抓住其中之一, 把它放進去!