官方授權台灣代理分銷
STM8 STM32 介面程式師的 ST 連結 V2
資料來源：https://www.seeedstudio.com/ST-Link-V2-for-STM8-STM32-interface-programmer-p-2297.html
Description
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
Specification:
Description:
1. Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address! Don't need to read instructions!
2, support all series STM8 SWIM download debugging (common development environment such as IAR, STVD etc.) are supported. Support the software version is as follows:
ST - LINK Utility 2.0 and above
STVD 2 and above
STVP 3.2.3 and above
IAR EWARM V6.20 and above
IAR EWSTM8 V1.30 and above
KEIL RVMDK V4.21 and above
3. Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2. The J17. S4.
4. Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST - LINK V2!
5. Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm dupont line, can deal with different target board line sequence, flexible connection;
6. Use U disk aluminum alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.
Technical Details
| Dimensions | 80mm x 80mm x 14mm |
| Weight | G.W 19g |
| Battery | Exclude |
描述
ST-LINK/V2 是一個在電路調試器和程式師為 STM8 和 STM32 微控制器家庭。單線介面模組 (游泳) 和 JTAG/串列線調試 (社署) 的介面是用來與任何 STM8 或 STM32 單片機位於應用板。
規範:
描述:
1. 支援全系列 STM32 社會福利署介面調試, 介面簡單 (包括電源), 4 線速, 工作穩定;介面定義外殼直接位址!不需要閱讀說明!
2、支援所有系列 STM8 游下載調試 (常見開發環境如 IAR、STVD 等) 均受支援。支援軟體版本如下:
ST 連結實用程式2.0 及以上
STVD 2 及以上
STVP 3.2.3 及以上
IAR EWARM V6.20 及以上
IAR EWSTM8 V1.30 及以上
KEIL RVMDK V4.21 及以上
3. 支援固件自動升級, 確保 ST 公司產品的支援。當他們離開固件已升級到最新的 V2。J17。S4
4. 增加 5 v 電源輸出, 輸出它能保護 i/o 口, 不怕出錯造成損壞的 ST 連結 V2!
5. 介面簡單, 使用純鍍銅2.54 間距喇叭, 具有20釐米杜邦線, 可處理不同的靶板線序列, 靈活連接;
6. 使用 u盤鋁合金外殼, 保護主機板, 方便攜帶, 不怕靜電, 不怕翻滾。
技術細節
| 尺寸 | 80mm x 80mm x 14mm |
| 重量 | G. W 20g |
| 電池 | 排除 |
