資料來源:https://www.seeedstudio.com/Raspberry-Pi-B%2B%262-Arc-Enclosure---Transparent-p-2155.html
The Multicomp Raspberry Pi Case is a simple yet stylish case designed to keep your Raspberry Pi safe. It comes in two pieces, base and cover made of moulded and smooth, full gloss finish ABS plastic.
The enclosure provides slots for the GPIO header, USB, Ethernet, microSD card, HMDI, and CSI connectors, besides rubber feet and vents to ensure the board gets proper cooling and Pi Camera module mounting holes. The package include four bumpers and two screws and slots for vertical mounting.
Features
Fully Tested on the Raspberry Pi Model B+
Made from tough, strong and durable ABS Plastic.
GPIO Ribbon Cable Slot for 40 Pin GPIO Cable
DSI, CSI and Access Slots for Camera/Video cables
Raspberry Pi Camera Seat
RoHS Certification
Compatible with Raspberry PiB+/2.
Dimensions
94mm x 63mm x 30mm / 3.7"x 2.5"x 1.2"
Note
This product does NOT include a Raspberry Pi Model B+.
Documents
For any technical support or suggestion, please kindly go to our forum.
Dimensions | 90mm x 60mm x 30mm |
Weight | G.W 37g |
Battery | Exclude |
Multicomp 覆盆子 pi 案件是一個簡單而時尚的情況下設計, 以保持您的覆盆子 pi 安全。它分為兩個部分, 底座和蓋製成的成型和平滑, 全光澤完成 ABS 塑膠。
外殼為 GPIO 報頭、USB、乙太網、microSD 卡、HMDI 和 CSI 連接器提供插槽, 除了橡膠腳和通風口, 以確保主機板得到適當的冷卻和 Pi 攝像頭模組安裝孔。該包包括四緩衝器和兩個螺絲和插槽垂直安裝。
功能
在樹莓 Pi 模型 B + 上進行完全測試
堅固耐用的 ABS 塑膠製成。
GPIO 40 針 GPIO 電纜的帶狀電纜插槽
攝像機/視頻電纜的 CSI 和接入插槽
樹莓 Pi 觀景窗位子
RoHS 認證
與覆盆子 PiB+/2。
尺寸
94mm x 63mm x 30mm/3.7 "x 2.5" x 1.2 "
注意
此產品不包括覆盆子 Pi 模型 B +。
檔
對於任何技術支援或建議, 請轉到我們的論壇.
尺寸 | 90mm x 60mm x 30mm |
重量 | G. W 37g |
電池 | 排除 |