資料來源:https://www.seeedstudio.com/Crazyflie-2.0---Prototyping-expansion-board-p-2111.html
Add a prototyping area to your Crazyflie 2.0 and lift your electronics into the air. Just solder directly on the expansion board and plug it to the expansion port.
This product is intended to be used together with the Crazyflie 2.0 nano quadcopter and uses it's expansion board system. Please have a look at the buyers guide for more info about Crazyflie 2.0 expansion boards.
Features
Soldering pads support both though hole and SMD components
Has SOT-23 footprint for 1-wire memory used for automatic detection (not mounted)
Specification
Makes all 20 pins in the Crazyflie 2.0 expansion port available
40 pads for prototyping (supporting both though hole and SMD components)
Footprint for optional 1-wire memory (not mounted)
Mechanical specification:
Weight: 1.5 g
Size (BxHxW): 28x28x4mm
Resources
Tech Support
If you have any further question for technical support, please contact support@bitcraze.io
Weight | G.W 3g |
Battery | Exclude |
Prototyping expansion board | 1 |
介紹:
原型區添加到您的Crazyflie 2.0和解除你的電子到空氣中。只需直接焊接在擴展板,並將其插入到擴展端口。
本產品是為了要與一起使用Crazyflie 2.0納米四軸和使用它的擴展板系統。請看看在買家須知約2.0 Crazyflie擴展板的更多信息。
特徵:
規範:
包裝內容:
資源:
支持
如果你有技術支持的任何進一步的問題,請聯繫support@bitcraze.se 。