官方授權台灣代理分銷
剝線計
原名
Wire Stripping Gauge
貨號
114990082
分類
Others
特價
446
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/Wire-Stripping-Gauge-p-1970.html
Description
The wire stripping gauge is the tool that enables you to efficiently and precisely prepare wires used with a solderless breadboard. It’s successfully funded on Kickstarter.
When you make a circuit on a breadboard, didn't you ever experience you failed to finish joining in attempting to hook up the lead to the breadboard without cutting extra length of lead? Or, when you cut the lead and try to hook it to the breadboard, didn't you ever get frustrated by different lengths of each leads? Here is the answer for you, Wire Stripping Gauge!
Take your gauge, and try to use it by the following steps.
1.Attach the Wire Stripping Gauge on a wire stripper.
2.Anchor a piece of wire to the gauge and strip the covering with the stripper.
3.Bend the part without covering by 90 degree with the hole on the gauge.
4.Measure the wire with the scale, and cut it into the desired length.
5.Anchor the other side with covering to the gauge and strip the covering.
6.Bend the part that got stripped of covering by 90 degree.
7.And complete!
Features
The gauge has a graduation with 2.54mm pitch in order to cut the wire precisely.
The pair of ditches to bend the legs on an IC inward, and the holes that make it much easier to bend a short wire.
Even on the back of the tool, there are some ditches to bend a resistance into desired length.
Specification
The gauge can be attached on a wire stripper with a blade that's 4mm or less in thickness, and 30mm or more in length.
Usage
You can cut the jacket to the same lengths;
You can cut the wiring to any length you like;
You can bend the lead even if it’s only short wide left;
You can bend the wiring to any length you like;
You can adjust the position of the legs on IC.
Most store-bought wire stripper can be fixturable;
Any further questions, please contact main[at]breadboardmaniac.com
Technical Details
| Weight | G.W 37g |
| Battery | Exclude |
剝離儀的導線，使您能夠高效，準確地準備與焊麵包板使用電線的工具。它的成功資助了Kickstarter的。
當您在麵包板上的電路，沒有你曾經遇到你沒能完成在試圖掛鉤率先線路板無切削鉛額外長度加盟？或者，當你將比分並嘗試將其鉤到線路板，沒有你得到每個線索的不同長度沮喪？這裡是你的，剝線計答案！
把你的表，並嘗試通過以下步驟來使用它。
1.Attach上剝線鉗的剝線計。
2.Anchor一段電線的規格和剝離的剝離覆蓋。
3.Bend零件時，不通過90度與量表上孔覆蓋。
4.Measure隨著規模的電線，並切成所需的長度。
5.Anchor另一側覆蓋到表和剝離覆蓋。
6.Bend資源被剝奪了90度覆蓋的部分。
7.And完成！
特徵
壓力表具有2.54mm節距的刻度，以便精確地切割導線。
該對溝渠的彎曲在IC向內腿部，並且能夠更容易彎曲短絲的孔。
甚至在工具的背面，有一些溝渠彎曲阻力成期望的長度。
規範
測量儀可以在電線剝皮用刀片這在長度在厚度為4mm或更小，30mm以上進行連接。
用法
您可以削減外套的長度相同;
你可以減少佈線，以任何你喜歡的長度;
您可以彎曲，即使它只是短期寬左領先;
您可以彎曲的佈線為您喜歡的任意長度;
可以調整上的IC的腿的位置。
大多數商店買剝線鉗可以fixturable;
有任何疑問，請與主[在] breadboardmaniac.com
