資料來源:https://www.seeedstudio.com/Raspberry-Pi-RTC-Expansion-Module-v1.1-p-2696.html
The RTC module is specifically designed for Raspberry Pi. It communicated with Raspberry Pi through I2C bus. There is a Maxim DS1307 and CR1220 button cell on the board to keep the real time for a long time after the Raspberry Pi has it’s power off. In order to offering a convenient way to debug, there are five pin has been setup which are 5v, 3.3v, Rxd,Txd on borad.
Features
Use Maxim DS1307 chip
Extends CR1220 button cell backup
Can be operated by a shell
Set a serial port connector
Programmable square-wave output signal
Consumes Less than 500nA in Battery-Backup Mode
Automatic Power-Fail Detect and Switch Circuitry
Programmable Square-Wave Output Signal
Parameters
Accuracy ±2ppm from 0°C to +40°C
Work voltage 5V
Battery Backup Input for Continuous Time keeping
Real-Time Clock Counts Seconds, Minutes, Hours, Day, Date, Month, and Year with Leap Year • Compensation Valid Up to 2100
Work temperature 0°C to +70°C
Documents
It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.
Weight | G.W 10g |
Battery | Exclude |
Raspberry Pi RTC Expansion Module v1.1 | 1 |
該RTC模塊是專為樹莓派設計。它通過I2C總線與溝通樹莓派。有在黑板上馬克西姆DS1307和CR1220鈕扣電池,以保持實時長時間的樹莓派有它的斷電後。為了提供一個便捷的方式來調試,有五腳已經設置這是5V,3.3V,RXD,TXD上BORAD。
特徵
參數
零件清單
DOCUMENTS
請訪問我們的wiki頁面,了解本產品的更多信息。可以理解的,如果你能幫助我們改進文檔,添加更多的演示代碼或教程。有關技術支持,請發表您的問題給我們的論壇 。