資料來源:https://www.seeedstudio.com/Grove---Flyport-Wi-Fi-Kit-p-1556.html
Flyport WiFi Kit is a clever gadget attributed to openPicus. It integrates excellent abilities as WiFi wireless communication, instant Grove access and data processing. Thanks to the great convenience coming with Grove, it just needs one or two Grove modules to turn this Flyport Kit into a mature IoT node.
The heart of this kit is a Flyport WiFi 802.11g module. It’s a miniature system on module featuring a fully integrated 802.11g WiFi interface and a 16 bit PIC processor. openPicus has prepared a free IDE for its Flyport series which efficiently shrinks the development time by managing all the required network interfacing, internet communications protocols and webserver for you.
Coming with the Wi-Fi module is a Grove Nest that serves as ears and hands for the Flyport board. There are 4 Digital, 3 Analog, 1 SPI and 1 I2C Grove sockets on it, so you can have a bite on most Grove sensors and actuators. Don’t worry about the programming. openPicus has been considerate to get a Grove library prepared for your quick and straightforward use.
Last but not the least; a miniUSB programmer is included in this kit as a tool to load in your program.
Need some sensors/actuators to get your hands on? What about monitoring the temperature and humidity condition, checking if any motion exists, or customizing the lighting of your stair? For an overall list of Grove devices supported by Flyport, click here.
Features
Compact IoT solution
Complete software support
Open interfaces to Grove
Dynamic webpage supported
Pins remappable
Specifications
16 bits, 16 MIPS, PIC 24FJ256 processor
802.11g Wi-Fi certified transceiver
256K byte FLASH
Low power - hibernation mode supported
UART, I2C, SPI interfaces
Analog and digital I/O pins
Micro SD card slot for datalogging
2,048V Precise voltage reference onboard (for ADC)
RTC quartz onboard (32.768Khz)
Built-in security features
Ad hoc or infrastructure mode supported
Project : How to turn on a fan using your smartphone
Documents
Flyport無線套件是一個聰明的小工具歸於openPicus。它集成了出色的能力,如WiFi無線通信,即時格羅夫接入和數據處理。由於與樹叢的到來極大的方便,它只是需要一個或兩個模塊格魯夫把這個Flyport包成一個成熟的物聯網節點。
該試劑盒的心臟是一個Flyport的WiFi 802.11g模塊。它和rsquo的;模塊,具有完全集成的802.11克WiFi接口和一個16位PIC處理器SA微型系統。 openPicus準備了免費的IDE其Flyport一系列有效縮小由管理所有所需的網絡接口,網絡通信協議和Web服務器為你的開發時間。
與Wi-Fi模塊來是格魯夫巢充當耳朵和手的Flyport板。有4個數字,3模擬,1個SPI並在其上1 I2C格羅夫插座,這樣你就可以對大多數格羅夫傳感器和執行器一口。唐&rsquo的;噸擔心節目。 openPicus一直體貼得到 一個樹叢庫 為您快速和簡單的使用準備。
最後但是同樣重要的;一個程序員的miniUSB包括在此套件作為一種工具,在程序加載。
需要一些傳感器/執行器讓你的手嗎?怎麼樣監測 溫度和濕度 條件下,如果任何檢查 運動 存在,或自定義 燈光 的樓梯?對於由Flyport支持格羅夫設備的整個列表,點擊 這裡 。
特徵
緊湊的解決方案,物聯網
完整的軟件支持
開放式接口格魯夫
動態網頁的支持
可重映射引腳
產品規格
16位,16 MIPS,PIC 24FJ256處理器
802.11克Wi-Fi認證的收發器
256K字節的FLASH
低功耗-休眠模式下支持
UART,I2C,SPI接口
模擬和數字I / O引腳
用於數據記錄Micro SD卡插槽
板載2,048V精確的電壓引用(ADC)
RTC石英板載(32.768kHz的)
內置的安全功能
特設或基礎架構模式下支持
項目:使用智能手機如何打開風扇
文件