官方授權台灣代理分銷

WizFiShield

原名
WizFi Shield

貨號
113990002

分類
Shields

特價
2,036

商品停售

由於停止生產、銷量不佳、升級改版... 或其他因素,SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品,請尋找其他替代品方案。

資料來源:https://www.seeedstudio.com/WizFi-Shield-p-1403.html

Description

WizFi Shield utilizes fully certified WizFi210 wifi module to provide your Arduino with wireless capability. SPI interface is used to allow for faster transmission speed and to free up the Arduino's UART. All the software and hardware materials are freely available and open source.
 
FEATURES
  • • Ultra Low Power
  • • Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b)
  • • Security Protocol: WEP, WPA/WPA2-PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP


SPECIFICATION

  • • Radio Protocol: IEEE 802.11b/g/n Compatible
  • • Supported Data Rates: 11, 5.5, 2, 1 Mbps (IEEE 802.11b)
  • • Modulation: DSSS and CCK
  • • RF Operating Frequency: 2.4 - 2.497 GHz
  • • Antenna Options: Chip antenna and U.FL connector for external antenna
  • • Networking Protocols: UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
  • • Power Consumption(Typical): Standby = 34.0 μA, Receive = 125.0 mA, Transmit = 135.0 mA
  • • RF Output Power (Typical): 8dBm ± 1dBm
  • • I/O Interface: UART, SPI, I2C WAKE, ALARM, GPIOs
  • • Power Source: 5V
  • • Dimensions: 68 x 66 x 19 mm


DOCUMENTS

More informations, including schematic, layout, example code, documents, please refer to WizFi Shieldwebpage.


Technical Details

Dimensions 70mm x 60mm x 20mm
Weight G.W 34g    
Battery Exclude

WizFi盾採用全面認證WizFi210 WiFi模塊為用戶提供無線功能您的Arduino。 SPI接口用於允許更快的傳輸速度和釋放阿爾杜伊諾的UART。所有的軟件和硬件的材料都是免費和開源的。
特徵
  • 超低功耗(34μA在待機狀態下)
  • 與標準的802.11b / g / n接入的速度高達to11Mbps點(802.11)運行
  • 安全協議:WEP,WPA / WPA2-PSK,企業,EAP-FAST,EAP-TLS,EAP-TTLS,PEAP
產品規格
  • 無線協議:IEEE的802.11b / g / n的支持
  • 支持的數據速率:11,5.5,2,1 Mbps的網(IEEE 802.11b)
  • 調製:DSSS和CCK
  • 射頻工作頻率:2.4 - 2.497 GHz的
  • 天線選項:芯片天線和U.FL連接器外部天線
  • 網絡協議:UDP,TCP / IP(IPv4)的,DHCP,ARP,DNS,HTTP / HTTPS客戶端和服務器(**)
  • 功耗(典型值):待機= 34.0μA,接收=125.0毫安,發送=135.0毫安
  • RF輸出功率(典型值):8dBm的±1dBm的
  • I / O接口:UART,SPI,I2C喚醒,報警,個GPIO
  • 電源:5V
  • 外形尺寸:68 X 66×19毫米
更多的信息,包括原理圖,佈局,示例代碼,文檔,請參考WizFi盾的網頁。

前往
現貨型錄

Line share