資料來源:https://www.seeedstudio.com/3x3x3-LED-Cube-Arduino-Shield-p-1747.html
The 3x3x3 LED Cube Arduino Shield was designed and built by young maker, Joey Hudy. This LED Cube is sure to impress. The cube's 3D construction is straightforward and easy to solder using the included jig and instructions. Sample code is available and can easily be modified to make your own basic animations and displays. It's available in both red and green so you can pick your favorite color and have it up and flashing in no time!
Note:
Please note that Arduino is not included.
The Arduino Code was written by Tim Keeley
Dimensions | 100mm x 90mm x 18mm |
Weight | G.W 27g |
Battery | Exclude |
PCB | 1 |
Green LED | 27 |
6 Pins for Arduino | 2 |
8 Pins for Arduino | 2 |
Resistors | 3 |
Foam Guide | 1 |
Small Wire | 1 |
Medium Wire | 1 |
Large Wire | 1 |
3x3x3 LED 立方體 Arduino 盾是由年輕的製造商, 喬伊 Hudy 設計和建造的。這個 LED 立方體肯定會留下深刻的印象。立方體的3D 結構是直接的, 易於焊接使用包括夾具和指令。示例代碼是可用的, 可以很容易地進行修改, 以使您自己的基本動畫和顯示。它有紅色和綠色的, 所以你可以選擇你最喜歡的顏色, 並有它和閃爍在任何時間!
注意:
請注意, Arduino 不包括在內。
Arduino 代碼是由 Tim 凱利編寫的
尺寸 | 100mm x 90mm x 18mm |
重量 | G. W 27g |
電池 | 排除 |
pcb | 1 |
綠色指示燈 | 27 |
6針 Arduino | 2 |
8針 Arduino | 2 |
電阻 | 3 |
泡沫指南 | 1 |
小絲 | 1 |
中線 | 1 |
大線 | 1 |