官方授權台灣代理分銷
覆盆子 Pi 2-歐洲快速入門套件
資料來源：https://www.seeedstudio.com/Quick-Starter-Kit-for-Raspberry-Pi-2--Europe-p-2537.html
Description
Quick Starter for Raspberry Pi 2 is HERE!
Notice: Raspberry Pi 2 not be included in the Quick Starter Kit for Raspberry Pi 2
When you get your first Raspberry Pi 2 single-board computer, you have to prepare a lot of peripheral devices, such as USB cable, SD card which must be installed OS, HDMI cable, etc. So, you may buy all devices online, and your time and money will be wasted.
But, Don’t worry Be Happy. ( It’s a song from Bobby McFerrin,I love it).
The New Quick Starter for Raspberry Pi 2 is COMING!
Quick Starter kit like a minimum system for Raspberry Pi 2, it means all must-have peripheral devices be included. Also, SD card preinstalled the Raspbian OS that you can play your Minecraftout-of-box
This pack contains:
Black Enclosure: An ABS plastic enclosure, easy to assemble.
5V 2.1A Power Adapter: 2.1A Power Adapter is the good choice for Pi 2.
Micro USBandHDMI Cable: There are a switch which USB cable contains is built-in, so you can turn on/off easily. And the HDMI cable is 1 meters length.
USB to TTL Cable: USB to TTL Serial Cable provides an easiest way to connect your microcontroller. It help you to log in Raspbian console via PuttyorScreen.
Ethernet CableandWiFi USB Adapter: Network devices, wire or wireless.
Features:
- Minimum kit to power up your Raspberry Pi 2
- Including 8GB SD Card preinstalled Raspbian OS
- Including micro USB cable with switch
- Includeing WiFi USB Adapter
- 5V, 2.1A power adapter with FCC/CE certificated - Europe Standard
- Including simply, but clear guide
- Not include unneeded devices
Specification:
- Power Adapter certificated：FCC, CE
- Europe Standard Power Adapter
- 802.11 b/g/n Wireless USB Adapter
- Ethernet Cable length: 1 meter
- HDMI Cable length: 1 meter
- USB to TTL Cable length: 1 meter
- Power Adapter Output: 5V, 2.1A
- BlackEnclosure
- Package size：74*134*202mm
Include:
- 1x 8GB SD card preinstalled Raspbian OS
- 1x Raspberry Pi Black Enclosure
- 1x 5V 2.1A USB Power Adapter - Europe Standard
- 1x Micro USB Cable with Switch
- 1x HDMI Cable - 3.2”(1 meter)
- 1x USB to TTL Serial Cable
- 1x Ethernet Cable - 3.2”(1 meter)
- 1x 802.11b/g/n Wireless USB Adapter
Note:
- Both hardware and Enclosure are compatitable with Raspberry Pi 3.
- The SD card which was preinstalled Raspbian OS doesn't compatitable with Raspberry Pi 3. If you want to use Raspberry Pi 3 with this Quick Starter Kit, you need to burn the new version Raspbian OS for SD card by yoursefl, here is a burn tutorial for you reference: http://elinux.org/RPi_Easy_SD_Card_Setup
Technical Details
| Dimensions | 200mm x 130mm x 70mm |
| Weight | G.W 397g |
| Battery | Exclude |
描述
快速啟動覆盆子 Pi 2 在這裡!
注意: 覆盆子 pi 2 不包括在樹莓 pi 2 的快速入門套件中
當你得到你的第一個覆盆子 Pi 2 單板電腦, 你必須準備很多週邊設備, 如 USB 電纜, SD 卡必須安裝作業系統, HDMI 電纜等。所以, 你可以在網上購買所有的設備, 你的時間和金錢將被浪費。
但是, 不要擔心快樂。(這是一首來自鮑比 McFerrin的歌曲, 我喜歡它)。
新的快速啟動覆盆子 Pi 2 來了!
快速入門套件, 如最低系統覆盆子 Pi 2, 這意味著所有必須有週邊設備包括在內。此外, SD 卡預裝了 Raspbian OS, 您可以播放您的Minecraft出紙盒
此包包含:
黑色主機殼: ABS 塑膠外殼, 易於組裝。
5V 2.1A 電源配接器: 2.1A 電源配接器是 Pi 2 的好選擇。
乙太網電纜和WiFi USB 配接器: 網路設備、電線或無線。
功能:
- 最小的套件, 以電源你的覆盆子 Pi 2
- 包括 8GB SD 卡預裝 Raspbian 作業系統
- 包括帶開關的微型 USB 電纜
- 包括 WiFi USB 配接器
- 5V、2.1A 電源配接器與 FCC/CE 認證-歐洲標準
- 包括簡單, 但明確的指南
- 不包括不需要的設備
規範:
- 電源配接器認證:FCC, CE
- 歐洲標準電源配接器
- 802.11/克/n 無線 USB 配接器
- 乙太網電纜長度: 1 米
- HDMI 電纜長度: 1 米
- USB 到 TTL 電纜長度: 1 米
- 電源配接器輸出: 5V、2.1A
- 黑色存儲
- 包裝 size:74*134*202mm
包括:
- 1x 8GB SD 卡預裝 Raspbian 作業系統
- 1x 覆盆子 Pi 黑色外殼
- 1x 5V 2.1A USB 電源配接器-歐洲標準
- 1x 帶開關的微型 USB 電纜
- 1x HDMI 電纜-3.2 "(1 米)
- 1x USB 到 TTL 串列電纜
- 1x 乙太網電纜-3.2 "(1 米)
- 1x 802.11b/g/克/n 無線 USB 配接器
注意:
- 硬體和主機殼都與覆盆子 Pi 3compatitable。
- 預先安裝 Raspbian OS 的 SD 卡不 compatitable 覆盆子 Pi 3。如果您想使用覆盆子 Pi 3 與這個快速入門套件, 您需要燒錄新版本 Raspbian OS 為 SD 卡由 yoursefl, 這裡是一個燒錄教程供您參考: HTTP://elinux.org/RPi_Easy_SD_Card_Setup
技術細節
| 尺寸 | 200mm x 130mm x 70mm |
| 重量 | G. W 417g |
| 電池 | 排除 |
