資料來源:https://www.seeedstudio.com/LoRa-LoRaWAN-Gateway---868MHz-Kit-with-Raspberry-Pi-3-p-2823.html
LoRa is a perfect long-range wireless solution to create low-power, wide area networks.So far we have released several “LoRa” boards such as Seeeduino LoRaWan and Grove LoRa Radio etc. However if you want to build you own LoRa network, there are 3 things that you should prepare to get started: a Gateway, at least one Node and a local server where you can monitor all your devices.
This kit provides all the basic elements you need: a Raspberry Pi 3, a Seeeduino LoRaWAN with GPS and a gateway & local server that allows you to collect and transfer data among all your LoRa nodes. By connecting the gateway with Seeeduino LoRaWAN and Grove modules, you can build your IOT prototype within minutes.
Regarding the gateway module RHF0M301, it is a 10 channel(8 x Multi-SF + 1 x Standard LoRa + 1 x FSK) LoRaWan gateway moduel with a 24pin DIP port on board, users can easily connect the RHF0M301 with PRI 2 bridge RHF4T002, adapter for Raspberry Pi 3 and RHF0M301.
There are several type of RHF0M301 distinguished by different communication frequency. This kit provides RHF0M301-868MHz (for the 915MHz version, please click here), so we also included a 868MHz antenna. Apart from that the kit also contains an 8GB SD card and USB cables, Ethernet Cables and other accessories.
Note:
Please update the firmware when the first time to use it. Please always plug 3.7V Lipo battery in case USB power supply is not sufficient.
Features
Low power consumption & wide area
Industrial standard reliability
Economic solution to build LoRa /LoRaWAN network
Rich Accessories of sensor and actuator
Real time monitoring
Dimensions | 200mm x 130mm x 50mm |
Weight | G.W 412g |
Battery | Exclude |
Raspberry Pi 3 | 1 |
Seeeduino LoRaWAN with GPS | 1 |
Gateway module RHF0M301 – 868 | 1 |
PRI 2 Bridge RHF4T002 | 1 |
8GB Micro SD Card – Class 10 | 1 |
USB to UART Adapter | 1 |
0dBi Rubber Duck Antenna | 1 |
Micro USB Cable 20cm | 1 |
Micro USB Cable 100cm | 1 |
RJ45 Ethernet Cable 200cm | 1 |
5V/2.1A American Standard Adapter with Micro USB Connector | 1 |
勞拉是一個完美的遠距離無線解決方案來建立低功耗,廣域networks.So到目前為止,我們已經發布了一些“勞拉”板如Seeeduino LoRaWan和格羅夫LORA收音機等。但是,如果你想建立你自己的LORA網絡,有3個東西,你應該準備開始:一個網關,至少一個節點和本地服務器,您可以監控所有的設備。
該套件提供了所有你需要的基本元素:一個樹莓派3,Seeeduino LoRaWAN與GPS和網關和本地服務器,可以讓你收集和所有LORA節點之間傳輸數據。通過連接與Seeeduino LoRaWAN和格羅夫模塊網關,就可以在幾分鐘時間內您的IOT原型。
關於網關模塊RHF0M301,它是一個10通道(8×多SF + 1×標準洛拉+ 1×FSK)與上板24針的DIP端口LoRaWan網關moduel,用戶可以方便地與PRI 2橋RHF4T002連接RHF0M301,適配器樹莓派3和RHF0M301。
存在由不同的通信頻率區分幾種類型的RHF0M301。該套件提供RHF0M301-868MHz(為915MHz的版本,請點擊 這裡 ),所以我們還包括一個868MHz的天線。除此之外,該套件還包括一個8GB SD卡和USB線,網線等配件。
特徵
低功耗和廣域
工業標準可靠性
經濟的解決方案來構建LORA / LoRaWAN網絡
傳感器和致動器的富配件
實時監控
零件清單
覆盆子裨3×1
與GPS X 1 Seeeduino LoRaWAN
網關模塊RHF0M301 - 915 X 1
PRI 2橋RHF4T002 X 1
8GB Micro SD卡-類10×1
USB到UART適配器X 1
0dBi橡膠鴨天線X 1
微型USB電纜20厘米X1
Micro USB數據線100厘米X 1
RJ45以太網電纜200厘米X 1
5V / 2.1A美國標準適配器,帶微型USB接口x 1
文件