資料來源:https://www.seeedstudio.com/Battery-Detector-with-Polymer-Lithium-Ion-5100mAh-3.8V-p-2647.html
Description
“I really should test my battery when I am out.” If you ever said that to yourself when you find out you just packed up a dead battery for your portable project, you really should get one of this battery kit.
The kit comes in two parts, a 3.8V 5100mAh Lipo battery and a battery indicator. The battery has a maximum discharging current of 3000mA and can work as the power supply for any of your portable projects that running at 3.8V.
As for the good mate of your batteries, the battery indicator comes very handy when you need to test how much power you have left. There are 2 different standard battery connectors available on board, JST-1.0 and JST-2.0, which covers the most commonly used battery connectors in the market. We also left you a soldering pad for 2.54 pin headers in case your battery does not fit any of it. You can only test ONE BATTERY AT A TIMEand the battery voltage should be NO HIGHER THAN 9V. The current battery level of your battery is described with 4 LEDs, each one represents a battery level of 25%. An ‘ERROR’ LED indicator is also used to detect if you’ve connected the battery in a wrong way.
Note: Test your batteries one at a time, and do not connect battery higher than 9V!
Features
Specification
The Batter Indicator:
Battery:
Part List
Documents
Weight | G.W 91g |
Battery | Lithium Cells / Batteries loose (bulk) UN3480-PI965 |
描述
“我當我出去真的應該測試我的電池。”如果你說你自己,當你發現你剛剛收拾死電池為您的便攜式項目,你真的應該得到這個電池套件之一。
該套件包括兩部分,一個3.8V 5100mAh鋰聚合物電池和電池指示燈 。該電池具有3000毫安的最大放電電流,可以作為任何便攜式項目跑跑在3.8V電源工作。
至於你的電池的好伴侶,當你需要測試你已經離開了多少電,電池指示燈亮起非常方便。有2個可用不同的標準電池的連接器在船上,JST-1.0和JST-2.0,它涵蓋了目前市場上最常用的電池連接器。我們也給你留了焊墊2.54排針的情況下,您的電池不適合它的任何。你只能測試一個電池的時間和電池電壓應不高於9V。電池的當前的電池電量用4個LED描述的,每一個代表25%的電量。一個“錯誤”LED指示燈也被用來檢測,如果你已經在一個錯誤的方式連接電池。
注:測試你的電池一次,不超過9V電池連接高!
特徵
規範
麵糊指標:
電池:
零件清單
文件