資料來源:https://www.seeedstudio.com/Crazyflie-2.0-spare-battery-%28including-charger%29-p-2657.html
Make sure to get the maximum amount of flight-time from your Crazyflie 2.0 using this spare battery and charger.
Features
240mAh LiPo battery
Weight: 7.1g
Size (WxHxD): 20x7x30mm (not including cable)
Capacity: 240mAh
Nominal voltage: 3.7 V (1 Cell)
Discharge: 15C
Charge: 2C
Operating Temperature: 0 ~35°C (Charging) / -20~60°C (Discharging)
Connector: Molex 51005-2P (Pin 1 positive)
Features
Electrical specification
Mechanical specification
LiPo battery charger
Weight: 1.2g
Size (WxHxD): 10.5x16x1.6mm (not including cable)
Connector for the Crazyflie 2.0 stock battery
Max charging current: 500mA
Supply voltage: 5V
μUSB charging connector
Based on the MCP73832 single-cell Li-Po charger
Connection points allows chaining of multiple chargers (1x2, 2.54mm pitch)
500mA single-cell Li-Po battery charger
Charging indicator
Connection points for chaining of multiple chargers
Features
Electrical specification
Mechanical specification
Caution
Using the battery under direct sunlight may cause overheating, which could result in invalidation or fire. Battery should be charged with proper charger, in compliance with correct operation instruction.
Resources
For more details, please visit Wiki.
For technical discussion, please visit Forum.
For projects that you would like to share with the community, please visit Recipe.
Tech Support
If you have any further question for technical support, please contact support@bitcraze.io
Weight | G.W 11g |
Battery | Lithium Cells / Batteries loose (bulk) UN3480-PI965 |
LiPo battery charger | 1 |
240mAh LiPo battery | 1 |
確保使用此備用電池和充電器從Crazyflie 2.0獲得飛行的最長時間。
特徵
包裝內容
警告
利用陽光直射下的電池可能會導致過熱,這可能導致無效或火災。電池應適當充電器,遵守正確的操作指令。
資源
支持
如果你有技術支持的任何進一步的問題,請聯繫技術支持(AT)bitcraze.io。