What is GrovePi+ Start kit for Raspberry Pi?
Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and running with the Raspberry Pi quickly. Just slip the GrovePi+ board over your Raspberry Pi and connect sensors to the board, you're ready to start hardware playing and prototyping with the powerful platform.
About The GrovePi+, It is stacked on top of the Raspberry Pi without the need for any other connections. Communication between the two occurs over the I2C interface. All Grove modules connect to the universal Grove connectors on the GrovePi+ shield via the universal 4 pin connector cable.
About Grove modules, which work on analog and digital signals, connect directly to the ATMEGA328 microcontroller on the Grove Pi+. The microcontroller acts as an interpreter between the Raspberry Pi and the Grove sensors. It sends, receives, and executes commands sent by the RaspberryPi.
The GrovePi+ is compatible with Raspberry Pi A+,B,B+/2,3.
Note: The Raspberry Pi board is not included.
The new GrovePi+ is CE certified and compatible with Linux and Win 10 IoT.
Dimensions | 180mm x 120mm x 45mm |
Weight | G.W 323g |
Battery | Exclude |
Grove Pi+ | 1 |
Grove - Rotary Angle Sensor | 1 |
Grove - Sound Sensor | 1 |
Grove - LCD RGB Backlight | 1 |
Grove - Temp&Humi Sensor | 1 |
Grove - Red LED | 1 |
Grove - Light Sensor | 1 |
Grove - Buzzer | 1 |
Grove - Relay | 1 |
Grove - Blue LED | 1 |
Grove - Button | 1 |
GrovePi+ Guidebook | 1 |
Cables | 10 |
Grove - UItrasonic Ranger | 1 |
Grove - Green LED | 1 |
GrovePi+ is a new version of GrovePi.It adds support for the newly RaspberryPi Model B+ and Model A+.There are three mounting holes can perfect match all version of Raspberry Pi.
DIY a smart monitoring device based on Win10 IoT
This tutorial shows the simplest thing that you can do with the GrovePi: Blink a LED. This is a great first project to learn how to connect hardware to the Raspberry Pi. The blinking LED is the hardware version of the software world’s “Hello World” pro
This project shows how to fade a LED with the raspberry pi. We cover the hardware and software setup in which we connect the Grove Pi to a rotary angle sensor (a fancy name for a potentiometer). The Raspberry Pi reads the analog value and dims or fades
In this project, we connect a Grove Accelerometer and a Buzzer to the Raspberry Pi to determine if the Accelerometer is tilted or not. You might use this project to detect and record motion, or to control a robot. We use a Grove switch to turn the entire
什麼是 GrovePi + 啟動套件的覆盆子 Pi?
攜帶一個 GrovePi + 板連同12精心選擇的格羅夫感應器與10件電纜, 這個初學者工具組得到你和運行與覆盆子 Pi 快速。只要滑倒 GrovePi + 板在您的覆盆子 Pi 和連接感應器的板, 您已經準備好啟動硬體播放和原型與強大的平臺。
關於 GrovePi +, 它是堆疊在樹莓 Pi 的頂部, 而無需任何其他連接。兩者之間的通信發生在 I2C 介面上。所有格羅夫模組通過通用4針連接器電纜連線到 GrovePi + 盾上的通用林連接器。
關於格羅夫模組, 在類比和數位信號工作, 直接連接到 ATMEGA328 微控制器在樹叢 Pi +。微控制器充當樹莓 Pi 和格羅夫感應器之間的解譯器。它發送、接收和執行由 RaspberryPi 發送的命令。
GrovePi + 與覆盆子 Pi A+,B,B+/2,3 相容。
注: 覆盆子皮板不包括在內。
新的 GrovePi + CE 認證, 並與 Linux 相容, 贏得10很多。
尺寸 | 180mm x 120mm x 45mm |
重量 | G. W 323g |
電池 | 排除 |
樹叢 Pi + | 1 |
樹叢-旋轉角感應器 | 1 |
格羅夫-聲音感應器 | 1 |
小樹林-LCD RGB 背光 | 1 |
格羅夫-溫度 & 濕度感應器 | 1 |
格羅夫紅色指示燈 | 1 |
格羅夫光感應器 | 1 |
格羅夫-蜂鳴器 | 1 |
樹叢-中轉 | 1 |
樹叢藍色 LED | 1 |
格羅夫按鈕 | 1 |
GrovePi + 旅遊指南 | 1 |
電纜 | 10 |
格羅夫-超聲波遊俠 | 1 |
格羅夫綠色指示燈 | 1 |
GrovePi + 是新版本的 GrovePi.It 添加支援新的 RaspberryPi 模型 B + 和模型 a +。有三安裝孔可以完美匹配所有版本的覆盆子 Pi。
DIY 基於 Win10 的智慧監控裝置
本教程展示了最簡單的事情, 你可以做的 GrovePi: 閃爍一個 LED。這是一個偉大的第一個專案, 學習如何連接到樹莓 Pi 硬體。閃爍的 LED 是軟體世界的 "Hello 世界" pro 的硬體版本
這個專案顯示了如何淡出一個 LED 與覆盆子 pi。我們覆蓋的硬體和軟體設置, 我們連接的樹叢 Pi 到旋轉角度感應器 (一個花哨的名稱電位器)。樹莓 Pi 讀取類比值並使其變暗或褪色
在這個專案中, 我們連接一個格羅夫加速度計和一個蜂鳴器的覆盆子 Pi, 以確定是否加速度計是傾斜或不。您可以使用這個專案來檢測和記錄運動, 或控制一個機器人。我們用格羅夫開關把整個