資料來源:https://www.seeedstudio.com/Pixel-v2.5-maker-kit-p-2451.html
Create LED art installations and wearables using low cost, HUB75 based LED panels. PIXEL supports installations from 32x16, 32x32, 64x32, and 64x64 resolutions. Simply download PIXEL’s free apps for iOS, Android, or Raspberry Pi and send GIF animations, scrolling text, and your own pixel art creations in seconds, no soldering or coding required! As an added bonus, the free apps include 100+ works of original pixel art commissioned for this project.
The PIXEL:LED ART board includes an onboard microSD card allowing you to save your LED art designs locally which will loop indefinitely on the LEDs after your device has been Bluetooth disconnected. Or leave your Android or Raspberry Pi connected and custom code an interactive application displaying art or scrolling messages using our open source example code including support for external sensors (external sensors only supported on Android only firmware).
The PIXEL Maker’s Kit comes installed with the Android only firmware by default supporting LED panels from 32x16 to 64x64 and can easily be flashed via the onboard microSD card for iOS and wearable support too. Refer here for firmware upgrade instructions and note that only PIXEL 2.5 boards purchased after February 2018 have a firmware that can be upgraded via the onboard microSD card.
Firmware | Android App | iOS App |
Raspberry Pi Support |
Grove Sensors |
Low Power for Wearables |
Hub75 LED Panel Support |
Android Only | Yes | No | Yes | Yes | No |
32×16, 32×32, 64×32, 64×64 |
iOS/Android 32×16 |
Yes | Yes | Yes | No | Yes | 32×16 Only |
iOS/Android 32×32 |
Yes | Yes | Yes | No | Yes | 32×16 Only |
After writing an animation or scrolling text to PIXEL’s onboard microSD card, your LED design will continue to play and loop after your device has been disconnected. Use PIXEL’s Raspberry Pi integration to create a dynamic installation like displaying different animations based on the weather for example.
The Android only firmware also supports Seeed Grove sensors, specifically 2 analog and 3 digital IO ports. For example, trigger certain animations when someone is near using a proximity sensor. To develop your own app for PIXEL, you'll need to be familiar with Android and/or Java programming and use the PIXEL SDK and sample code.
See the PIXEL Maker’s Kit page for a list of tested and supported HUB75 LED matrix panels and power supply options. This kit does not include an LED matrix panel or power supply/battery. Your choice of power supply will depend on the number of LED Matrix panels in your installation.
For technical support and suggestions, please visit our forum.
Also more information and instructions available at http://ledpixelart.com/maker including links to supported HUB75 LED matrix panels and power supply options.
Dimensions | 170mm x 120mm x 40mm |
Weight | G.W 156g |
Battery | Exclude |
HUB75 LED Matrix Panel | Not Included |
Pixel 2.5 PCBA | 1 |
Power Cable | 1 |
A to A USB 2.0 Cable | 1 |
MicroSD Card | 1 |
Blurtooth CSR4.0 USB Dongle | 1 |
Pixel Flat Cable | |
FPC IDC Cable |
控制一個 LED 矩陣與您的 Android, PC, Mac, Linux, 覆盆子 Pi, 或 BeagleBone 黑色與圖元板。只需使用圖元免費應用程式和發送圖像, GIF 動畫, 滾動文本, Twitter 供稿, 和您自己的圖元藝術創作在幾分鐘內, 不需要焊接或編碼!作為額外的獎金, 180 + 原創圖元藝術的作品委託 Kickstarter 專案也包括在內。
圖元有兩種模式: 獨立模式和互動式模式。在獨立模式下, 使用設備將 GIF 動畫寫入圖元本地 microSD 卡。在斷開設備連接後, GIF 將繼續播放和迴圈。在互動式模式中, 將圖元視為其他顯示器, 它基於圖元應用程式中的邏輯進行某些事情, 該應用可以包括外部感應器輸入,也使用圖元5感應器埠 (2 類比和3數位)。要開發自己的圖元應用程式, 您需要熟悉 Android 和/或 JAVA 程式設計, 並使用圖元 SDK 和示例代碼.
功能
您可以為32x32 的 LED 面板提供自己的5V 電源 (推薦的4A 最低)。有關說明, 請參見本指南, 並注意指南引用了32x32 的 LED 矩陣面板。當您第一次運行圖元應用程式時, 需要將 LED 矩陣更改為您正在使用的類型 (32x16、32x32、64x32 或 64x64).
還有很多更多的資訊在圖元: LED 藝術專案頁!
部件清單
1 x 圖元 2.5 PCBA
1 x 電源線
1 x a 到 USB 2.0 纜線
1 x MicroSD 卡
1 x Blurtooth CSR4.0 USB 轉換器
1 x 圖元扁線
1 x FPC IDC 電纜
有關技術支援和建議, 請訪問我們的論壇.
尺寸 | 170mm x 120mm x 40mm |
重量 | G. W 156g |
電池 | 排除 |