資料來源:https://www.seeedstudio.com/Quick-Starter-Kit-for-Raspberry-Pi-2-Model-B-p-2364.html
Quick Starter for Raspberry Pi 2 is HERE!
Notice: Raspberry Pi 2 is not included in this kit.
When you get your first Raspberry Pi 2 single-board computer, you have to prepare a lot of peripheral devices, such as USB cable, SD card which must be installed OS, HDMI cable, etc. So, you may buy all devices online, and your time and money will be wasted.
Quick Starter kit is like a minimum system for Raspberry Pi 2, all must-have peripheral devices have been included in this kit. Also, the SD card has also preinstalled the Raspbian OS that you can play your Minecraftout-of-box.
This pack contains:
Black Enclosure: An ABS plastic enclosure, easy to assemble.
5V 2.1A Power Adapter: 2.1A Power Adapter is the good choice for Pi 2.
Micro USBandHDMI Cable: There is a switch which USB cable contains is built-in, so you can turn on/off easily. And the HDMI cable is 1 meters length.
USB to TTL Cable: USB to TTL Serial Cable provides the easiest way to connect your microcontroller. It helps you to log in Raspbian console via PuttyorScreen.
Ethernet CableandWiFi USB Adapter: Network devices, wire or wireless.
Features
Minimum kit to power up your Raspberry Pi 2
Including 8GB SD Card preinstalled Raspbian OS
Including micro USB cable with switch
Including WiFi USB Adapter
5V, 2.1A power adapter with FCC/CE certificated
Including simple, but clear guide
American Standard Power Adapter
802.11 b/g/n Wireless USB Adapter
Note
Both hardware and Enclosure are compatible with Raspberry Pi 3.
The SD card which was preinstalled Raspbian OS doesn't compatible with Raspberry Pi 3. If you want to use Raspberry Pi 3 with this Quick Starter Kit, you need to burn the new version Raspbian OS for SD card by yourself, here is a burn tutorial for you reference: http://elinux.org/RPi_Easy_SD_Card_Setup
Dimensions | 200mm x 130mm x 70mm |
Weight | G.W 395g |
Battery | Exclude |
Power Adapter certificated | FCC, CE |
Ethernet Cable length | 1 meter |
HDMI Cable length | 1 meter |
USB to TTL Cable length | 1 meter |
Power Adapter Output | 5V, 2.1A |
Package size | 74*134*202mm |
8GB SD card preinstalled Raspbian OS | 1 |
Raspberry Pi Black Enclosure | 1 |
5V 2.1A USB Power Adapter | 1 |
Micro USB Cable with Switch | 1 |
HDMI Cable - 3.2”(1 meter) | 1 |
USB to TTL Serial Cable | 1 |
Ethernet Cable - 3.2”(1 meter) | 1 |
802.11b/g/n Wireless USB Adapter | 1 |
快速啟動覆盆子 Pi 2 在這裡!
注意: 覆盆子 Pi 2 不包括在這個套件。
當你得到你的第一個覆盆子 Pi 2 單板電腦, 你必須準備很多週邊設備, 如 USB 電纜, SD 卡必須安裝作業系統, HDMI 電纜等。所以, 你可以在網上購買所有的設備, 你的時間和金錢將被浪費。
快速入門套件類似于覆盆子 Pi 2 的最小系統, 所有必需的週邊設備都已包含在該套件中。此外, SD 卡還預裝了 Raspbian OS, 您可以播放您的Minecraft框.
此包包含:
黑色主機殼: ABS 塑膠外殼, 易於裝配.
5V 2.1A 電源配接器: 2.1A 電源配接器是 Pi 2 的好選擇.
微 USB和HDMI 電纜: 有一個開關, USB 電纜包含內置, 因此您可以輕鬆地打開/關閉。HDMI 電纜長度為1米.
USB 到 TTL 電纜: USB 到 TTL 串列纜線提供了最簡單的連接微控制器的方法。它可以説明您通過膩子或螢幕來登錄 Raspbian 主控台.
乙太網電纜和WiFi USB 配接器: 網路設備, 有線或無線.
功能
最小的套件, 以電源你的覆盆子 Pi 2
包括 8GB SD 卡預裝 Raspbian 作業系統
包括帶開關的微型 USB 電纜
包括 WiFi USB 配接器
5V、2.1A 電源配接器 (FCC/CE 認證)
包括簡單但清晰的指南
美國標準電源配接器
802.11/克/n 無線 USB 配接器
注意
硬體和存儲模組都相容覆盆子 Pi 3.
預先安裝 Raspbian OS 的 SD 卡與覆盆子 Pi 3 不相容。如果你想使用這個快速入門套件的覆盆子 Pi 3, 你需要自己燒錄新版本的 SD 卡 Raspbian OS, 這裡是一個燒錄教程供您參考: HTTP://elinux.org/RPi_Easy_SD_Card_Setup
尺寸 | 200mm x 130mm x 70mm |
重量 | G. W 395g |
電池 | 排除 |
電源配接器認證 | FCC, CE |
乙太網電纜長度 | 1米 |
HDMI 電纜長度 | 1米 |
USB 到 TTL 電纜長度 | 1米 |
電源配接器輸出 | 5V、2.1A |
包裝尺寸 | 74 * 134 * 202 mm |
8GB SD 卡預裝 Raspbian 作業系統 | 1 |
覆盆子 Pi 黑色外殼 | 1 |
5V 2.1A USB 電源配接器 | 1 |
帶開關的微型 USB 電纜 | 1 |
HDMI 電纜-3.2 "(1 米) | 1 |
USB 到 TTL 串列電纜 | 1 |
乙太網電纜-3.2 "(1 米) | 1 |
802.11b/g/克/n 無線 USB 配接器 | 1 |