資料來源:https://www.seeedstudio.com/BlueStack-Micro%2B-%28iOS-version%29-p-2982.html
Bluestack board, supports DVMEGA raspberry Pi – boards (not included), both dual and single band. With the BlueDV app, you have access to:
via Bluetooth: DMR and Fusion, NO DSTAR!!
via Windows or Linux (USB): DSTAR, Fusion and DMR.
IOS version Bluetooth ONLY
- Switch activated (in), serial mode for Jonathan Naylor (G4KLX mode), MMDVM, BlueDV for Windows, or DVMEGA firmware upgrade mode via X-loadertool.
Note:new units will be switching off programming-mode after 1 minute. This is for MMDVM-mode. Older units; disconnect the wire on radio board after upgrade. Download the needed firmware for the DVMega board HERE!
- Switch de-activated (out), BlueDV mode, connecting to BlueDV App. BlueDV is an IOS app, so perfect to use as mobile hotspot!!
NOTE: NO DSTAR SUPPORT YET.
Unit is always powered through the micro usb, so use an adaptor or a battery-pack to power, or just power via the PC/USB-hub.
If you want BlueStack Andorid version, please visit here.
Dimensions | 97mm x 80mm x 15mm |
Weight | G.W 13g |
Battery | Exclude |
BlueStack Micro+ (Ios version) | 1 |
藍調板,支持DVMEGA覆盆子Pi板(不包括),雙頻和單頻。使用BlueDV應用程序,您可以訪問:
通過藍牙:DMR和Fusion,NO DSTAR!
通過Windows或Linux(USB):DSTAR,Fusion和DMR。
IOS版本藍牙
- 為Jonathan Naylor(G4KLX模式),MMDVM,BlueDV for Windows啟動(in),串行模式,或通過X-loader工具進行DVMEGA固件升級模式。
注意: 1分鐘後,新設備將關閉編程模式。這是為MMDVM模式。舊單位升級後斷開無線電板上的電線。下載所需的固件為DVMega板HERE !
- 切換去激活(輸出),BlueDV模式,連接到BlueDV App。 BlueDV是一個IOS應用程序,非常適合用作移動熱點!
注意: 沒有DSTAR支持。
單元始終通過微型USB進行供電,因此使用適配器或電池組供電,或通過PC / USB集線器供電。
如果您想要BlueStack Andorid版本,請訪問這裡 。