官方授權台灣代理分銷

電動小鬼 - 一個WiFi功能的開發平台

原名
Electric Imp - a WiFi enabled Development Platform

貨號
109990042

分類
Other for Development Platforms

特價
1,030

暫無庫存

SeeedStudio 目前暫時無庫存,因為該公司無法提供確切恢復供貨時間,為了避免延宕或出貨爭議,恕不提供下單代訂服務。

資料來源:https://www.seeedstudio.com/Electric-Imp---a-WiFi-enabled-Development-Platform-p-1971.html

Description

What is the electric imp? In essence, the Imp provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. It's more than just a WiFi card, or even a WiFi module with processing built in - it's an integrated platform that deals with the drudgery of connectivity, allowing you to concentrate on the application instead of the mechanics.
 
The Electric Imp is a WiFi enabled development platform powered by a Cortex-M3 processor core, the dimension is 32 x 24 x 2.1mm in a SD card form factor. 
 
The Electric Imp API provides a set of classes and global objects with which imp code may access local hardware and remote cloud functionality. This API augments the Squirrel Standard Library, which provides generic functionality. For more general information about the Squirrel language see Learning Squirrel. 
 
An April breakout board will be strongly recommended to go with Electric Imp. 
 
FEATURES
• 802.11 b/g/n WiFi
 • 20MHz 11n channels, 1 x 1
 • +16.75dBm max output power (802.11b)
 • -97dBm typical sensitivity (1Mbps)
 • Integrated antenna with 2.5dBi max gain
• 32-bit Cortex M3 processor
• Robust embedded operating system with fail-safe firmware updates
 • Virtual machine for vendor firmware
• Embedded bi-color red/greenLED for status indication
• Embedded phototransistor for our patent-pending BlinkUp optical configuration technology
• 6 user selectable I/Os
 • GPIO, PWM, Analog input & output
 • SPI (2 channels), UART (3 channels), I2C (2 channels)
• Low power 6uA sleep mode
• FCC, CE, IC C-Tick certified
 
Pin assignments and description
 

Pin Number

Pin Name

Description

3

Vss

Ground

4

VDD

Power input

1,2,5,7,8&9

PIN1,2,5,7,8&9

I/O, please refer to Pin mux table

6

ID

Connects to the Atmel ATSHA ID chip

 
Pin mux
In addition to acting as a GPIO, each pin on the imp001 can be configured to one of several specialized functions. While pins may only have one function at a time, they may be reconfigured during run-time to change function as needed. For example, a pin may first be configured as a DAC and then reconfigured as an ADC. Additionally, not all the pins in a hardware function need to be assigned to that function. For example, pins 8 and 9 could be used as UART and pins 1 and 2 could be used as I2C.
 
All I/O pins are initially tri-stated.
 
The imp001 can be woken from low power sleep mode with a rising edge on PIN1. If this signal is pulsed, the minimum pulse width is 20ms.
 
 
RESOURCES
Any further questions, please view the Electric Imp forum.

Technical Details

Dimensions 60mm x 90mm x 7mm
Weight G.W 5g    
Battery Exclude

什麼是電動小鬼?在本質上,進出口提供了幾乎所有的硬件​​設備連接兩者到其他設備和互聯網服務一種簡單,集成的方式。這不僅僅是一個WiFi卡,甚至建在處理的WiFi模塊 - 它是一個集成平台,與連接的苦差事交易,讓您專注於應用程序,而不是機制。
電動小鬼是一個WiFi功能的開發平台,搭載一枚Cortex-M3處理器內核,尺寸為32×24×在SD卡外形2.1毫米。
電動進出口API提供了一組類和全局對象與小鬼代碼可以訪問本地硬件和遠程的雲功能。這個API增強了松鼠標準庫 ,它提供了通用的功能。有關松鼠的語言更一般的信息,請參閱學習松鼠。
四月的接口板將被強烈建議去與電氣進出口。
特徵
支持802.11 b / g / n的無線網絡
•20MHz的11N通道,1×1
•+ 16.75dBm最大輸出功率(802.11)
•-97dBm典型靈敏度(1Mbps的)
•集成天線2.5dBi最大增益
32位的Cortex M3處理器
強大的嵌入式操作系統故障安全固件更新
•虛擬機供應商的固件
嵌入式雙色紅/ GREENLED的狀態指示
我們正在申請專利的BlinkUp光學配置技術的嵌入式光電晶體管
6用戶可選的I / O
•GPIO,PWM,模擬量輸入輸出
•SPI(2通道),UART(3通道),I2C(2通道)
低功耗的6uA睡眠模式
FCC,CE,IC C-TICK認證
引腳分配和說明

引腳數

引腳名稱

描述

3

VSS

地面

4

VDD

電源輸入

1,2,5,7,8和9

PIN1,2,5,7,8和9

I / O,請參考管腳复用表

6

ID

連接至愛特梅爾ATSHA ID芯片

管腳复
除了充當GPIO,在imp001每個銷可被構造成的幾個專門的功能之一。而銷只能有一個功能的時間,它們可以在運行時被重新配置為需要改變功能。例如,銷可以首先被配置為DAC和然後重新配置為一個ADC。此外,並非在一硬件功能所有引腳需要被分配給該函數。例如,銷8和9可作為UART和引腳1和2可以用來作為I2C。
所有I / O引腳最初三態。
該imp001可以從低功耗睡眠模式與PIN1上升沿被喚醒。如果這個信號是脈衝,最小脈衝寬度為20ms。
資源
有任何疑問,請查看電氣進出口論壇

前往
現貨型錄

Line share