官方授權台灣代理分銷
MDDS30 - Cytron SmartDriveDuo-30
原名
MDDS30 - Cytron SmartDriveDuo-30
貨號
108070022
分類
Drivers for Interaction
特價
2,789
暫無庫存
SeeedStudio 目前暫時無庫存，因為該公司無法提供確切恢復供貨時間，為了避免延宕或出貨爭議，恕不提供下單代訂服務。
資料來源：https://www.seeedstudio.com/MDDS30---Cytron-SmartDriveDuo-30-p-3013.html
Description
SmartDriveDuo-30 is one of the latest smart series motor drivers designed to drive medium power brushed DC motor with current capacity up to 80A peak (few seconds) and 30A continuously, each channel. This driver is designed specially for controlling differential drive mobile robot using RC controller. Nevertheless, MDDS30 also can be controlled using analog joystick or microcontroller (PWM, Serial). MOSFETs are switched at 18 KHz to ensure quiet operation and no annoying whining sound. Besides, it also equipped with a microcontroller unit to provide smart features such as multiple input modes and current limit and thermal protection.
Features:
Bi-directional control for dual brushed DC motor.
Support motor voltage from 7V to 35VDC.
Maximum current up to 80A peak (1 second), 30A continuously, each channel.
On board MOSFETs are switched at 18 KHz for quiet operation.
Battery low voltage indicator.
Battery over voltage indicator.
Thermal protection.
Current limit protection.
Multiple input modes: RC, Analog/PWM, Serial Simplified and Serial Packetized.
GROVE compatible connectors for control input.
RC (Radio Control) friendly connectors.
On board push buttons for fast test and manual operation.
On board LED indicators for Error, RUN, Over current, motor output, for each channel.
NO POLARITY PROTECTION FOR V MOTOR.
-
Dimension: 81.28mm(W) x 101.60mm (L) x 42mm (H)
Quick Start
Technical Details
| Dimensions | 135mm x 115mm x 45mm |
| Weight | G.W 315g |
| Battery | Exclude |
| Operating Condition | |
| ompatible input | 3.3 and 5V |
| Motor Channel | 2 |
| Operating Voltage (VDC) | 7 to 35 |
| Peak Current (A) | 80 |
| Continuous Current (A) | 30 |
| Operating Modes | |
| Arduino Shield | NO |
| PWM (Lock-Antiphase and Sign-Magnitude) | YES |
| UART | YES |
| Analog | YES |
| RC Servo Signal | YES |
| Special Protection | |
| Polarity Protection | NO |
| Current / Thermal Protection | YES |
| Appearance | |
| LEDs Indicator | YES |
| Test/Manual Button | YES |
| Other Features | |
| others | Groove Compatible |
Part List
| MDDS30 | 1 |
| Grove Cable | 2 |
| Dupont 3 pin Cable | 2 |
Documents
描述
SmartDriveDuo-30是最新的智能串聯電機驅動器之一，設計用於驅動每個通道的電流容量高達80A峰值（幾秒）和30A的中等功率有刷直流電機。該驅動器是專門為使用RC控制器控制差速驅動移動機器人而設計的。不過，MDDS30也可以使用模擬遊戲桿或微控制器（PWM，串行）進行控制。 MOSFET的開關頻率為18 KHz，以確保運行安靜，沒有煩人的嗚嗚聲。此外，它還配備了一個微控制器單元，提供多種輸入模式，電流限制和熱保護等智能功能。
特徵：
雙刷直流電機的雙向控制。
支持7V至35VDC的電機電壓。
最大電流可達80A峰值（1秒），每個通道連續30A。
在板上，MOSFET以18KHz的頻率進行開關操作。
電池低電壓指示器。
電池過壓指示器。
熱保護。
電流限制保護。
多種輸入模式：RC，模擬/ PWM，串行簡化和串行打包。
GROVE兼容連接器用於控制輸入。
RC（無線電控制）友好的連接器。
在板上按鈕進行快速測試和手動操作。
板上LED指示燈用於每個通道的錯誤，運行，過電流，電機輸出。
V馬達沒有極性保護。
尺寸：81.28毫米（寬）x 101.60毫米（長）x 42毫米（高）
快速開始
