資料來源:https://www.seeedstudio.com/Sidekick-Basic-Kit-for-TI-LaunchPad-p-2571.html
As for more support materials, please to access www.energia.nu/sidekick.
Sidekick is a collection of popular components for DIY projects. It is easy to create custom breadboard circuits that can interface with a development kit. This is an excellent starter kit for new electronics engineers and makers.
This kit is fully compatible with all TI LaunchPads. The following examples are based on LaunchPads that support Energia software. If you are using any of the LaunchPad kits, the examples should be the same or involve minor pin configuration changes.
The Examples
Example 00: Blinking LED (Output)
Example 01: Fade RGB LED (PWM)
Example 02: Push Button (Input)
Example 03: Multiple LED (Many Outputs)
Example 04: Shift Register (Integrated Circuit)
Example 05: Piezo Buzzer (Sound)
Example 06: Potentiometer (Variable Resistor)
Example 07: Photoresistor (Light Sensor)
Example 08: Spin the Motor (Transistor)
Example 09: Temperature (Thermistor and Temp Sensor)
Example 10: 7 Segment Display (Digital Display)
Features:
Fully compatible with all TI LaunchPads.
Lot of examples
Energia supported
Breadboard BoosterPack for TI LaunchPad
Documents
Please refer to http://energia.nu for more information.
Or, you can locate the pin map diagrams at http://energia.nu/pin-maps
Dimensions | 160mm x 90mm x 40mm |
Weight | G.W 233g |
Battery | Exclude |
Breadboard | 1 |
Green LED | 5 |
Red LED | 5 |
RGB Common Anode LED | 1 |
Ceramic Capacitor 10nF | 10 |
Ceramic Capacitor 100nF | 10 |
Aluminum capacitor 100uF | 5 |
Resistor 330R | 10 |
Resistor 1K | 10 |
Resistor 10K | 10 |
Tilt switch | 1 |
Thermistor | 1 |
Photoresistor | 1 |
Diode | 1 |
Buzzer | 1 |
Button | 5 |
Switch | 5 |
Potentiometer with knob | 2 |
Breadboard jumper wire – long | 5 |
Breadboard jumper wire – short | 18 |
7 segment display | 1 |
Small DC motor | 1 |
TI 8-bit shift register (SN74HC595N) | 1 |
TI Analog Temperature Sensor (LM19CIZ/NOPB) | 1 |
TI NPN transistor (LP395Z/NOPB) | 1 |
TI NPN transistor (PN2222/NOPB) | 1 |
Breadboard BoosterPack Adapter PCB | 1 |
Label for components | 1 |
Sidekick basic for LaunchPad Manual | 1 |
至於更多支援材料, 請訪問 www.energia.nu/sidekick。
"助手" 是一組用於 DIY 專案的流行元件。它很容易創建自訂板電路, 可以與開發套件介面。這是一個優秀的初學者工具組, 為新的電子工程師和製造商。
此套件完全相容所有 TI LaunchPads。下面的示例基於支援 Energia 軟體的 LaunchPads。如果您使用的是任何啟動板套件, 則示例應相同或涉及較小的 pin 配置更改。
的例子
示例 00: 閃爍指示燈 (輸出)
示例 01: 淡出 RGB LED (PWM)
示例 02: 按按鈕 (輸入)
示例 03: 多 LED (多輸出)
例 04: 移位暫存器 (積體電路)
示例 05: 壓電蜂鳴器 (聲音)
示例 06: 電位器 (可變電阻器)
示例 07: 光敏電阻 (輕型感應器)
例子 08: 旋轉馬達 (電晶體)
例子 09: 溫度 (熱敏電阻和溫度感應器)
示例 10: 7 段顯示 (數字顯示)
功能:
完全相容所有 TI LaunchPads。
很多例子
Energia 支援
鈦板 BoosterPack
檔
請參閱HTTP://energia.nu有關詳細資訊,
或者, 您可以在中找到 pin 映射圖 HTTP://energia.nu/pin-maps
尺寸 | 160mm x 90mm x 40mm |
重量 | G. W 228g |
電池 | 排除 |
板 | 1 |
綠色指示燈 | 5 |
紅色指示燈 | 5 |
RGB 共陽極 LED | 1 |
陶瓷電容器10nF | 10 |
陶瓷電容器100nF | 10 |
鋁電容器100uF | 5 |
電阻330R | 10 |
電阻1K | 10 |
電阻10K | 10 |
傾斜開關 | 1 |
熱敏電阻 | 1 |
光敏電阻 | 1 |
二極體 | 1 |
蜂鳴器 | 1 |
按鈕 | 5 |
開關 | 5 |
帶旋鈕電位器 | 2 |
板跳線-長 | 5 |
板跳線-短 | 18 |
7段顯示 | 1 |
小型直流電機 | 1 |
TI 8 位移位暫存器 (SN74HC595N) | 1 |
TI 類比溫度感應器 (LM19CIZ/NOPB) | 1 |
鈦 NPN 電晶體 (LP395Z/NOPB) | 1 |
鈦 NPN 電晶體 (PN2222/NOPB) | 1 |
板 BoosterPack 配接器 PCB | 1 |
元件標籤 | 1 |
基板手冊的基本助手 | 1 |