資料來源:https://www.seeedstudio.com/Gameduino-2-p-1676.html
Description
The Gameduino 2 turns your Arduino into a hand-held modern gaming system. Touch control, a 3-axis accelerometer, microSD storage for game assets, headphone audio output, and all-new eye-popping graphics on its bright 4.3 inch screen.
The Gameduino 2's FT800 graphics engine is highly capable, and its OpenGL-style command set makes graphics programming easy. It can load JPEGs, supports alpha transparency, and has a full 32-bit color pipeline. There are examples and code on the project page at
http://excamera.com/sphinx/gameduino2/.
Audio output is available on the amplified headphone jack, and provides a range of built-in sounds as well as sample playback at up to 48 kHz.
The Gameduino 2 software library is documented extensively in the book, available for free download.
Features
- Complete hand-held game module: supply an MCU (Arduino/Rasberry Pi) and power
- Arduino shield form-factor
- Bright 4.3” (diagonal) 480x272 screen, 262144 colors
- Powered by latest FT800 Embedded Video Engine (EVE)
- Resistive touch-screen input
- 3-axis accelerometer for tilt gaming
- microSD storage slot
- Amplified audio via headphone socket
- Software and book available for download
Important
Note this unit does not include a microSD card.
Specification
- Arduino Uno shield form-factor, uses SPI bus on pins 13-11. Voltage levels 3.3-5v
- 3.3-5V power supply required
- 3-axis analog accelerometer
- 4.3” (diagonal) TFT with adjustable backlight
- 3.5mm audio jack
- microSD card socket
- Weight: 85g
- Size: 105x75x20 mm
Technical Details
Dimensions |
120mm x 75mm x 30mm |
Weight |
G.W 81g |
Battery |
Exclude |
描述
該Gameduino 2將您的Arduino成手持式的現代遊戲系統。觸摸它明亮的4.3英寸的屏幕上控制,一個3軸加速計,支持microSD存儲遊戲資源,耳機音頻輸出,以及全新的令人瞠目的圖形。
音頻輸出可在放大的耳機插孔,並以高達48 kHz的提供了一系列內置的聲音,以及採樣回放。
該Gameduino 2軟件庫中的書,可免費下載詳盡的記載。
特徵
- 完整的手持遊戲模塊:提供一個MCU(Arduino的/樹莓派)和電源
- Arduino的盾牌外形
- 明亮的4.3“(對角線)480×272的屏幕,顏色262144
- 搭載最新的嵌入式FT800視頻引擎(EVE)
- 電阻式觸摸屏輸入
- 3軸加速度計的傾斜遊戲
- 的microSD存儲插槽
- 通過耳機插孔音頻放大
- 軟件並提供下載的書
重要
注意:這個單位不包括microSD卡。
規範
- Arduino的烏諾盾的外形,採用引腳13-11 SPI總線。電壓等級3.3-5V
- 需要3.3-5V電源
- 3軸加速度傳感器的模擬
- 4.3“(對角線)的TFT具有可調節背光
- 3.5毫米音頻插孔
- microSD卡插槽
- 重量:85克
- 尺寸:105x75x20毫米
查看更多