The 7"Touchscreen Monitor for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects. The 800 x 480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi are required; power from the Pi’s GPIO port and a ribbon cable that connects to the DSI port present on all Raspberry Pi's. Touchscreen drivers with support for 10-finger touch and an on-screen keyboard will be integrated into the latest Raspbian OS for full functionality without a physical keyboard or mouse.
Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
Viewable screen size: 155mm x 86mm
Screen Resolution 800 x 480 pixels
10 finger capacitive touch.
Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
Adapter board is used to power the display and convert the parallel signals from the display to the serial (DSI) port on the Raspberry Pi.
4x stand-offs and screws (used to mount the adapter board and Raspberry Pi board to the back of the display
4x jumper wires (used to connect the power from the Adapter Board and the GPIO pins on the Pi so the 2Amp power is shared across both units)
7 "觸控式螢幕顯示器為覆盆子 Pi 讓使用者能夠創建一個完整的專案, 如平板電腦, 娛樂系統和嵌入式專案。800 x 480 顯示器通過配接器板連接, 它處理電源和信號轉換。只有兩個連接到 Pi 是必需的;從 pi 的 GPIO 埠和一條帶狀電纜連線到所有樹莓 pi 上的有光埠。觸控式螢幕驅動程式與支援10手指觸摸和螢幕鍵盤將集成到最新的 Raspbian OS 的完整功能, 沒有一個物理鍵盤或滑鼠。