覆盆子 Pi 3.2 英寸觸控式螢幕顯示 w 和8擴展頭

This is a Raspberry Pi Display specially designed for Model B+. It features 3.2"TFT LCD and resistive touch panel, 65K colors and 320x240 pixel resolution. The display integrates LCD driver ILI934 and touch driver XPT2046, communicating with Raspberry Pi through High Speed 48MHz SPI connection. With the touch panel, you could play the Raspberry Pi without the need for a mouse.

 

It's very easy to setup, without the need for a cable or extra power supply, it can be directly attached onto the Raspberry Pi. We have packaged a system image with the LCD driver for you, what is based on the official Raspbian Operating System, so you don’t need to download driver with the step and step instructions. The system image file can be found from the attaching CD-R. After the image installation, power on the Raspberry Pi, it may take 20 seconds for loading the driver, and then the LCD will work.

 

There is a little difference between Model B+ and Model B, but this display also works with Raspberry Pi B, if you don't mind the display will cover the USB and Ethernet ports.

FEATURES

Compatible with Raspberry Pi B+ and B

Supports Raspbian Operating system

65K colors and 320x240 Pixel Resolution

Powered directly off Raspberry Pi

Display full GUI output / primary output

High Speed 48MHz SPI connection

25 Frames per second

Integrated ILI9341 TFT LCD Driver

Integrated 4-wire Resistive Touch Panel and XPT2046 Driver

Wiring

Display	Raspberry Pi	Remark
GND	GND
VCC	5.0V
RESET	GPIO2	Reset
LED-A	3.3V
KEY1	GPIO1	Button
KEY2	GPIO4	Button
KEY2	GPIO5	Button
LCD_DIN	MOSI
LCD_CLK	SCLK
LCD_CS	CE0
LCD_RS	GPIO3	Command/data
TP_DIN	MOSI	Touch Controller
TP_OUT	MISO
TP_CLK	SCLK
TP_CS	CE1
TP_IRQ	GPIO0

PART LIST

Raspberry Pi 3.2"Touchscreen Display x1

Resistive Touch Pen x1

CD-R x1 (System Image Files and Software Included)

DOCUMENTS

Raspbian System Image - Preinstall LCD Driver, Plug and Play

Image Installation Guides

Q&A - Instructions for 3.2"Touchscreen Display

ILI9341 and XPT2046 Datasheet