官方授權台灣代理分銷
7英寸1024x600電容觸摸屏DIY套件
資料來源：https://www.seeedstudio.com/7-Inch-1024x600-Capacitive-Touch-Screen-DIY-Kit-p-2932.html
Description
This is a new DIY kit for all makers; it is a fantastic HDMI monitor with capacitive touch screen and driver free. We added a CTP driver board and provided a capacitive touch screen to make it a whole new suite. After that, you don't need to calibrate your touch screen, and make your 7 inch display a touch screen. It's been tested on Raspberry Pi, beagle bone black, PC and Mac book. And it works well on those platforms and it is really plug and play.
Features
It supports 1024x600 resolution and supports approximate 30fps, maximum 60fps
The capacitive touch function give the user full control over any device.
It's driver free for your device due to built-in EDID device information.
It is very easy to let the equipment correctly identified the touch screen.
The Capacitive USB touch screen can support functions of the right mouse button and drag and drop.
It can support multipoint touch, maximum 10 points. (Only test in windows 10)
Connection Details
The CTP driver board has two USB port type, one of them is a MicroUSB cable on the right side.
(Both of them are available for your touch screen, one of them should be connected to the output device.)
Work with Raspberry Pi
If you are using Raspberry Pi, you can change resolution by these steps:
Login to your Raspberry Pi and edit /boot/config.txt file, make sure it has following parameter:
hdmi_force_hotplug=1
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1024 600 60 3 0 0 0
Save it and reboot your system.
FAQ
If touch screen is out of work please make sure you connect the Display’s MicroUSB Port to your device (PC, Raspberry Pi, Beagle bone black etc.)
Note:
We are not sure it can work at android system due to it dose not test in android OS yet.
If you find that the screen is blur when you connect it to your device, please check the FPC cable on the back of driver board, it may loose when it was shipping to you. Just pull out the block of the FPC cable and put the FPC wires into it and make sure it fasten tightly and retry it again. Please take care of this cabin cable; it’s connected to the board and sends the touch screen data to the chip on the board.
Technical Details
| Dimensions | 265mm x 165mm x 50mm |
| Weight | G.W 410g |
| Battery | Exclude |
| Operating voltage | 5V (current requirement 2A), 9V@1.5A(Recommended), 12V@1A |
| Rated power | 6-7W |
| Signal input | AV + VGA + HDMI (HDMI 1.2) |
| Resolution | 1024 * 600 |
| Plug and Play | free driver |
| OSD language | Simplified Chinese, Traditional Chinese, English, Japanese, Korean, Spanish, French, German, Italian, Portuguese |
| Control | Multi-function OSD operation or potentiometer adjust the brightness and color |
| Using mature program | clear display |
| Multipoint touch, maximum 10 points | (Only test in windows 10) |
| Support image flip up and down | the image can conversion 4: 3 / 16: 9 display format |
| Support 30fps | maximum 60fps |
Part List
| 7 inch 1024x600 High Resolution Screen | 1 |
| 7 inch Capacitive Touch Panel | 1 |
| HDMI/VGA/S-Video Video driver board | 1 |
| CTP driver board (Capacitive Touch Panel Driver board) | 1 |
| Key board | 1 |
| Key board cable wire | 1 |
| Driver board Power supply cable wire | 1 |
| USB touch screen cable wire | 1 |
描述
這是所有製造商的新DIY套件;它是一個夢幻般的HDMI顯示器，電容式觸摸屏和驅動程序免費。我們添加了一個CTP驅動板，並提供了一個電容觸摸屏，使其成為一個全新的套件。之後，您不需要校準觸摸屏，並使您的7寸顯示屏成為觸摸屏。它已經在Raspberry Pi，Beagle骨黑，PC和Mac書上進行了測試。它在這些平台上運行良好，它是真正的即插即用。
特徵
它支持1024x600分辨率，支持近似30fps，最大60fps
電容觸摸功能使用戶能夠完全控制任何設備。
由於內置的EDID設備信息，因此您的設備無需驅動程序。
很容易讓設備正確識別觸摸屏。
電容式USB觸摸屏可以支持鼠標右鍵的功能和拖放功能。
它可以支持多點觸摸，最多10點。 （僅在Windows 10中測試）
連接細節
CTP驅動板有兩種USB端口類型，其中一個是右側的MicroUSB電纜。
（它們都可用於您的觸摸屏，其中一個應連接到輸出設備。）
與Raspberry Pi合作
如果您使用的是Raspberry Pi，您可以通過以下步驟更改分辨率：
登錄到您的Raspberry Pi並編輯/boot/config.txt文件，確保它具有以下參數：
hdmi_force_hotplug = 1
hdmi_group = 2
hdmi_mode = 87
hdmi_cvt 1024 600 60 3 0 0 0
保存並重新啟動系統。
常問問題
如果觸摸屏不工作，請確保將顯示器的MicroUSB端口連接到設備（PC，Raspberry Pi，Beagle骨黑等）
注意：
我們不確定它可以在Android系統上工作，因為它在Android操作系統中還沒有測試。
如果您發現連接到設備時屏幕模糊，請檢查驅動板背面的FPC電纜， 發送給您時可能會鬆動。 只需拉出FPC電纜的塊，將FPC電線插入其中，並確保緊固並再次重試。 請照顧這個客艙電纜;它連接到電路板，並將觸摸屏數據發送到電路板上的芯片。
