資料來源:https://www.seeedstudio.com/Xadow-1.54-inch-Touchscreen-p-2553.html
This TFT Display contains 240 X 240 pixels that can be controlled individually to display up to 262K colours. Above the display is a layer of capacitive touchscreen, offering 29.4mm X 29.4mm active area at the centre of display. As a single touch screen, it can detect finger presses anywhere within the active area during the normal operations. The TFT driver is based on the ST7789S IC Driver with 2 bit data and 4 bit control serial interface while the capacitive touchscreen controller uses I2C.
Notice
Try to use it in a steady environment as abrupt variation on temperature and humidity may cause malfunction of the panel.
Try to keep the panel surface clean and avoid any kind of adhesive applied on the surface, you may use neutral detergent or isopropyl alcohol on a clean soft cloth to clean the panel surface.
Include
Xadow 1.54"Touchscreen * 1
FPC Cable 35 PIN * 2
Features
240 x 240 resolution
Display up to 262K colours
4x 2mm/0.9"mounting holds
Built-in Xadow Connectors for easy pluggable FPC cables
Perfect choice for your DIY phone project
Specification
TFT Driver: ST7789S
Touchscreen Type: Capacitive
Backlight: 3 adjustable while LEDs
Current draw: ~ 100mA at full backlight
Resolution: 240 x 240 pixels
Connector: 2x 35 PIN Xadow Connectors for Xadow
GSM+BLE & Xadow Audio
Interfaces: 4 line serial interface for TFT display
I2C for touchscreen
Dimensions: Board – 50.22mm X 47.21mm / 1.98’’ X 1.86’’
Touchscreen – 38.1mm X 37.8mm / 1.51” X 1.51”
Active Area – 27.72mm X 27.72mm / 1.09” X 1.09”
4x 2mm/0.9” mounting holds
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum
Dimensions | 80mm x 120mm x 24mm |
Weight | G.W 17g |
Battery | Exclude |
這種 TFT 顯示幕包含 240 X 240 圖元, 可以單獨控制, 以顯示多達262K 的顏色。顯示幕上方是一層電容式觸控式螢幕, 在顯示幕中心提供 29.4mm X 29.4mm 活動區域。作為一個單一的觸控式螢幕, 它可以在正常操作期間檢測到活動區域內任何地方的指壓機。TFT 驅動程式是基於 ST7789S IC 磁碟機的2位資料和4位控制序列介面, 而電容式觸控式螢幕控制器使用 I2C。
通知
儘量在穩定的環境中使用它, 因為溫度和濕度的突然變化可能導致面板出現故障。
儘量保持面板表面清潔, 避免任何類型的膠粘劑在表面上應用, 你可以使用中性洗滌劑或異丙醇在乾淨的軟布上清潔面板表面。
包括
Xadow 1.54 "觸控式螢幕 * 1
FPC 電纜35針 * 2
功能
240 x 240 解析度
顯示多達262K 的顏色
4x 2 mm/0.9 "安裝支架
內置 Xadow 連接器, 可輕鬆插入 FPC 電纜
您的 DIY 電話專案的完美選擇
規範
TFT 驅動: ST7789S
觸控式螢幕類型: 電容式
背光: 3 可調而 led
當前繪圖: 〜100mA 在全背光
解析度: 240 x 240 象素
連接器: 2x 35 針 Xadow 連接器 Xadow
GSM + & Xadow 音訊
介面: 4 線序列介面, 用於 TFT 顯示器
觸控式螢幕 I2C
尺寸: 板-50.22mm x 47.21mm/1.98 "x 1.86"
觸控式螢幕– 38.1mm x 37.8mm/1.51 "x 1.51"
活動區域– 27.72mm x 27.72mm/1.09 "x 1.09"
4x 2 mm/0.9 "安裝支架
檔
請訪問我們wiki頁面以瞭解有關此產品的更多資訊。如果您能説明我們改進文檔, 添加更多演示代碼或教程, 將不勝感激。有關技術支援, 請將您的問題張貼到我們的論壇