官方授權台灣代理分銷
EasyVR 盾 3 Arduino
原名
EasyVR Shield 3 for Arduino
貨號
103990080
分類
Shield for Arduino
特價
2,026
商品停售
由於停止生產、銷量不佳、升級改版... 或其他因素，SeeedStudio 原廠目前已經停止生產、供應、或銷售本件商品，請尋找其他替代品方案。
資料來源：https://www.seeedstudio.com/EasyVR-Shield-3-for-Arduino-p-2458.html
Description
The EasyVR Shield 3 is an adapter board for the EasyVR 3 module, designed to simplify its use among the Arduino community.
The Shield is compatible with any Arduino board using UNO-R3 Shield headers, running at either 3.3V or 5V levels, by using the IOREF pin to select the EasyVR operating voltage.
It is also backward compatible with earlier Arduino boards that don’t have the IOREF pin, which are using 5V I/O levels by default. If your board does not have the IOREF pin but it is running at 3.3V, you can still operate the EasyVR Shield 3 correctly if you manually connect pins IOREF and 3V3 together, for example with a jumper wire.
The board comes with separate Arduino stackable headers for the Shield interface. The EasyVR 3 module is also provided separately.
Main Features
Compatible with Arduino boards that have the 1.0 Shield interface (UNO R3) and legacy boards including, but not limited to:
- Arduino Duemilanove
- Arduino Uno
- Arduino Mega
- Arduino Leonardo
- Arduino Due
Supports 5V and 3.3V main boards through the IOREF pin
Supports direct connection to the PC on main boards with a separate USB/Serial chip and a special software-driven “bridge” mode on boards with only native USB interface, for easy access by the EasyVR Commander
Enables different modes of serial connection and also flash updates to the embedded EasyVR module (through the Mode Jumper)
Supports remapping of serial pins used by the Shield (in SW mode)
Provides a 3.5mm audio output jack suitable for headphones or as a line out
For technical support and suggestions, please visit our forum.
描述
EasyVR 盾3是 EasyVR 3 模組的配接器板, 旨在簡化其在 Arduino 社區中的使用。
盾是相容任何 Arduino 板使用 UNO-R3 盾頭, 運行在3.3V 或5V 級, 通過使用 IOREF 引腳選擇 EasyVR 工作電壓。
它也是向後相容的早期 Arduino 板, 沒有 IOREF 引腳, 這是使用 5V i/o 的預設水準。如果您的主機板沒有 IOREF 針, 但它運行在 3.3V, 您仍然可以操作 EasyVR 盾3正確, 如果您手動連接引腳 IOREF 和3V3 一起, 例如用跳線線。
該主機板帶有獨立的 Arduino 可堆疊的報頭, 用於遮罩介面。EasyVR 3 模組也單獨提供。
主要功能
與具有1.0 盾介面 (R3) 和舊式主機板 (包括但不限於) 的 Arduino 主機板相容:
- Arduino Duemilanove
- Arduino
- Arduino 兆
- Arduino 萊昂納多
- Arduino 到期
通過 IOREF 針支援5V 和3.3V 主機板
支援在主機板上使用單獨的 usb/串列晶片和專門的軟體驅動的 "橋接" 模式直接連接到 PC 上, 只有本機 usb 介面, 便於 EasyVR 指揮官訪問
啟用不同的串列連接模式, 並對嵌入式 EasyVR 模組 (通過模式跳線) 進行快閃記憶體更新
支援重新映射遮罩使用的串列針腳 (在 SW 模式下)
提供適合於耳機的3.5mm 音訊輸出插孔, 或作為出線
有關技術支援和建議, 請訪問我們的論壇。
