資料來源:https://www.seeedstudio.com/Papilio-Analog-Grove-Wing-p-1618.html
Need to connect some analog sensors to your Papilio FPGA board? Look no further, the Papilio Analog Grove Wing opens up the incredible library of Grove building blocks for your use! Grove modules provide rock solid and proven designs for simple electronic building blocks such as gas sensors, joysticks, light sensors, and pretty much anything you can imagine.
If you need an electronic widget and don’t want to bother with breadboarding then Grove is your answer. Just purchase theGrove module you need, connect it to the Papilio Analog Grove Wing or the Papilio Digital Grove Wing using the standard connectors and you are ready to go! Each Grove module comes with an Arduino Sketch that will work with the ZAP IDE, just take a look at the modules Wiki page to find the source code.
Features
8 Analog Channels – Connect 8 analog Grove devices to one Papilio Wing Slot!
Easy Connections – Use the converter cable to connect the Grove connector to the space saving 3 pin header on the Wing.
Large library of Electronic Widgets – The Grove product line has pretty much any electronic widget you could imagine. This single Wing opens up hundreds of possibilities to connect to your Papilio FPGA board!
Important
Note this unit does not include the converter cable, please be sure to buy a bundle of converter cables to attach your Grove modules to the Papilio Analog Grove Wing.
This Wing allows you to connect Analog Grove modules, if you want to connect Digital modules then please take a look at the Papilio Digital Grove Wing.
Specification
8 Channel SPI ADC
1Msps sampling speeds
12-Bit A/D Converter
Accepts voltages from 0 to 5V
For more info and to get started with your Papilio Analog Grove Wing, visit the hardware guide page.
If you encounter any problems when using this product, visit the Gadget Factory Forum.
Dimensions | 60mm x 60mm x 12mm |
Weight | G.W 6g |
Battery | Exclude |
需要將一些類比感應器連接到您的鳳蝶 FPGA 主機板?看沒有進一步, 鳳蝶類比格羅夫翼打開了令人難以置信的庫格羅夫構建塊, 供您使用!格羅夫模組為簡單的電子積木 (如氣體感應器、操縱杆、光感應器等) 提供堅如磐石的設計和經驗證, 幾乎可以想像任何東西.
如果你需要一個電子小部件, 不想打擾平臺, 那麼格羅夫就是你的答案。只需購買您需要的格羅夫模組, 將其連接到鳳蝶類比格羅夫翼或使用標準連接器的鳳蝶數位格羅夫機翼, 您就可以開始了!每個格羅夫模組都帶有一個 Arduino 的草繪, 該草圖將使用ZAP IDE, 只需查看模組 Wiki 頁面就可以找到原始程式碼.
功能
8類比頻道–連接8類比格羅夫設備到一個鳳蝶翼插槽!
簡單連接-使用轉換器電纜將林連接器連接到機翼上節省3針接頭的空間.
大型電子部件庫-格羅夫產品線有幾乎所有的電子小部件, 你可以想像。這個單一的機翼打開數以百計的可能性連接到您的鳳蝶的 FPGA 板!
重要
注意此設備不包括轉換器電纜, 請務必購買一捆的轉換器電纜將您的格羅夫模組附加到鳳蝶類比格羅夫翼.
這個機翼允許你連接類比格羅夫模組, 如果你想連接數位模組, 然後請看看鳳蝶數位格羅夫翼。
規範
8通道 SPI ADC
1Msps 採樣速度
12位 a/d 轉換器
接受電壓從0到5V
欲瞭解更多資訊並開始使用您的鳳蝶類比格羅夫翼, 請訪問硬體指南頁.
如果在使用此產品時遇到任何問題, 請訪問小工具工廠論壇.
尺寸 | 60mm x 60mm x 12mm |
重量 | G. W 6g |
電池 | 排除 |