官方授權台灣代理分銷
覆盆子 Pi 馬達板 v1。0
資料來源：https://www.seeedstudio.com/Raspberry-Pi-Motor-Board-v1.0-p-2411.html
Description
Raspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Raspberry Pi B/B+/A+ and Pi 2 Model B, controlling the speed and direction of each one independently.
Raspberry Pi Motor Driver Board v1.0 support a very wide range of input voltage from 6V~28V. otherwise ,the on board DC/DC converter support a very wide range of input voltage, and can provide a 5V power supply for the Raspberry Pi with 1000mA maximum current. So, you just need one power supply to drive the motors and power up the Raspberry Pi.
Features:
Operating Voltage: 6V ~ 28V
DC/DC output: 5V 1000mA @"5V"pin
Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak)
Output Duty Range: 0%~100%
Output short-circuit protection (short to VPWR or GND)
Over-current limiting (regulation) via internal constant-off-time PWM
Temperature dependant current limit threshold reduction
Raspberry Pi compatible
Specification:
- Compatible: Raspberry Pi ; Other main board via jumpers;
- Power interface: DC Jack;
- Dimensions: 91.20 * 56.15mm;
- Operating Voltage: 6V ~ 28V
Technical Details
| Weight | G.W 53g |
| Battery | Exclude |
Part List
| Raspberry Pi Motor Board v1.0 | 1 |
描述
覆盆子 Pi 馬達驅動板 v1.0 是基於飛思卡爾 MC33932 雙 H 橋功率積體電路, 它可以控制感應負載電流高達每單橋5.0A 峰值。它可以讓你駕駛兩個 DC 電機與您的覆盆子 pi b/b +/A + 和 pi 2 模型 B, 控制的速度和方向, 每一個獨立。
覆盆子 Pi 馬達驅動板 v1.0 支援非常廣泛的輸入電壓從 6 v ~ 28 五。否則, 車載 dc/dc 轉換器支援非常廣泛的輸入電壓, 並可為覆盆子 Pi 提供5V 電源, 1000mA 最大電流。所以, 你只需要一個電源來驅動馬達和電源的覆盆子 Pi。
功能:
- 工作電壓: 6V ~ 28V
- 直流/直流輸出: 5V 1000mA @ "5V" 針
- 輸出電流 (每個通道): 2A (連續運行)/5 a (峰值)
- 輸出工作範圍: 0% ~ 100%
- 輸出短路保護 (短至 VPWR 或地線)
- 過電流限制 (調節) 通過內部恒定的時間 PWM
- 溫度依賴性電流極限閾值約簡
- 覆盆子 Pi 相容
規範:
相容:覆盆子皮;其他主機板通過跳線;
電源介面:DC 插孔;
尺寸:91.20 * 56.15mm;
工作電壓: 6V ~ 28V
