資料來源:https://www.seeedstudio.com/Grove---Solid-State-Relay-p-1359.html
Grove – Solid State Relay is a non-contact electronic switch module that has relay features. Based on S208T02, it has a maximum output of 250VAC/4A, with a switching speed less than 10ms. This module is equipped with acrylic base and a 3D-printed protection insulation shield, for user’s safety. The featured LED indicates that the relay is on. It can be widely used in various areas such as computer peripheral interfaces, temperature/speed/light adjustment, servo control, petrochemical, medical instrumentations, financial devices, coal, meters, traffic signals, etc.
Features
3D-printed protection insulation shield
Compatible with both 3.3V and 5V control level
Low switching latency (≤10ms)
LED on-state indicator
Featured radiator provide better stability
Acrylic base and insulation paper increase safety performance
Grove compatible
Warning!!!
This module only works with AC load for the output. If you use DC load, once the relay is turned on, it will always stay on.
Dimensions | 70mm x 60mm x 65mm |
Weight | G.W 54.5g |
Battery | Exclude |
Grove - Solid State Relay | 1 |
格羅夫–固態繼電器是一種具有中繼特性的非接觸式電子開關模組。基於 S208T02, 它的最大輸出為 250 vac/4 a, 開關速度小於10ms。本模組配有亞克力底座和3維列印保護絕緣防護罩, 供使用者安全使用。功能指示燈指示中繼已進行。可廣泛應用於電腦週邊介面、溫度/速度/調光、伺服控制、石化、醫療儀器、金融設備、煤炭、儀錶、交通信號燈等各個領域。
功能
3維列印保護絕緣遮罩
相容3.3V 和5V 控制級別
低切換延隔時間 (≤10ms)
指示燈狀態指示器
精選散熱器提供更好的穩定性
丙烯酸基和絕緣紙提高安全性能
格羅夫相容
檔
尺寸 | 70mm x 60mm x 65mm |
重量 | G. W 56g |
電池 | 排除 |
格羅夫-固態繼電器 | 1 |